CloudBoost: How to configure http-proxy

Samenvatting: This article explains how to use the http-proxy command to configure a proxy server on the CloudBoost.

Dit artikel is van toepassing op Dit artikel is niet van toepassing op Dit artikel is niet gebonden aan een specifiek product. Niet alle productversies worden in dit artikel vermeld.
Bekijk andere hulpbronnen

Instructies

By default, using the CloudBoost appliance in an environment configured with a proxy server sends all traffic out of the CloudBoost through the proxy. Certain targets can be excluded from going through the proxy using the 'http-proxy exclude' command.
 
Note: Before using this command, be prepared with the IP address and the prefix size of the subnet mask for the targets to be excluded.
 
Examples of using the 'http-proxy' command depend on what kind of setup and exclusions are being entered.
 
  • Set a proxy and have all egress traffic go through the proxy: 
    http-proxy <host:port>
Ex: http-proxy proxy.dell.com:8080
  • Reset the http-proxy setting back to default: 
    http-proxy reset
  • Set a proxy and have all egress traffic go through the proxy except for a single specified target: 
    http-proxy <host:port> exclude <ip>/<prefix>
    • For this example, the proxy is proxy.dell.com:8080 and the target to exclude is at 10.10.10.10 on subnet mask 255.255.255.0: 
      http-proxy proxy.dell.com:8080 exclude 10.10.10.10/24
  • Set a proxy and have all egress traffic go through the proxy except for any target on a certain IP subnet: 
    http-proxy <host:port> exclude <ip>/<prefix>
    • For this example, the proxy is proxy.dell.com:8080 and the targets to exclude are at 10.10.10.0 on subnet mask 255.255.255.0: 
      http-proxy proxy.dell.com:8080 exclude 10.10.10.0/24
  • Set a proxy and have all egress traffic go through the proxy except for a specified target and any target on a certain IP subnet: 
    http-proxy <host:port> exclude <ip>/<prefix>,<ip>/<prefix>
    • For this example, the proxy is proxy.dell.com:8080 and the targets to exclude are at 10.10.10.0 on subnet mask 255.255.255.0 and the single target is 10.20.20.20 on subnet mask 255.255.254.0: 
      http-proxy proxy.dell.com:8080 exclude 10.10.10.0/24,10.20.20.20/23
 
To add multiple exclusions, add a comma (,) between each excluded target.

Getroffen producten

CloudBoost Virtual Appliance

Producten

CloudBoost Virtual Appliance
Artikeleigenschappen
Artikelnummer: 000013606
Artikeltype: How To
Laatst aangepast: 24 mrt. 2026
Versie:  6
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.