NetWorker: Creating a Data Domain device fails with error: Authentication type AUTH_NONE not adequate
Samenvatting: Attempting to create a NetWorker Data Domain device fails, peer information must be cleared on all involved hosts for the other hosts.
Dit artikel is van toepassing op
Dit artikel is niet van toepassing op
Dit artikel is niet gebonden aan een specifiek product.
Niet alle productversies worden in dit artikel vermeld.
Symptomen
Data Domain device creation fails in NetWorker, the following error is observed:
authentication error: Rd=SN-NAME:DD-NAME_DEV-NAME Authentication type AUTH_NONE not adequate
Where SN-NAME is the name of the remote storage node.
Where DD-NAME is the name of the Data Domain.
Where DEV-NAME is the name of the device user is attempting to create.
Oorzaak
Corrupted NetWorker peer information between the NetWorker server and the Storage Node managing the device.
Oplossing
Clear the NetWorker peer information on both the NetWorker server and storage nodes observing this failure. One of the following methods can be used:
- NetWorker: How to clear NSR peer information mismatches automatically using nsradmin -C
- NetWorker: Fixing inconsistent NSR peer information
NOTE: If the NetWorker Management Console (NMC) server is on a separate host from the NetWorker server, the NMC server's peer information should also be cleared.
Getroffen producten
NetWorkerProducten
NetWorker, NetWorker SeriesArtikeleigenschappen
Artikelnummer: 000036946
Artikeltype: Solution
Laatst aangepast: 14 jan. 2026
Versie: 4
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.