Importing MDT boot images into Windows Deployment Services

Samenvatting: Import Microsoft Deployment Toolkit (MDT) boot image to use with Windows Deployment Services (WDS).

Dit artikel is van toepassing op Dit artikel is niet van toepassing op Dit artikel is niet gebonden aan een specifiek product. Niet alle productversies worden in dit artikel vermeld.
Bekijk andere hulpbronnen

Symptomen

 

Oorzaak

 

Oplossing

Follow the steps below to import Microsoft Deployment Toolkit (MDT) boot images into Windows Deployment Services (WDS).

NOTE: A working knowledge of both Microsoft Deployment Toolkit and Windows Deployment Services is recommended to use this article.

Windows Deployment Services (WDS) update.

When a boot image (with updated drivers for example) is updated in MDT, it does not update WDS automatically.

How to import the boot image

  1. Supply the correct drivers in MDT:

    SLN304283_en_US__2MDT-Import-1
     
  2. Update the Deployment Share

    SLN304283_en_US__3MDT-Import-2
     
  3. Go to Windows Deployment Services, Boot Images
  4. Go to Add Boot Image (LiteTouchPE_x64.wim) if Lite Touch Windows PE x64 is not already present in WDS:
    • If Lite Touch Windows PE (x64) is already in WDS Boot Images, right click on the image and choose Replace Image (and then select the location of LiteTouchPE_x64.wim).

      SLN304283_en_US__4MDT-Import-3

      SLN304283_en_US__5MDT-Import-4
Artikeleigenschappen
Artikelnummer: 000134992
Artikeltype: Solution
Laatst aangepast: 06 mei 2021
Versie:  3
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.