Solutions Enabler：当 SRDF/A 正在运行时，Symclone 建立失败

Samenvatting: 当 R2 设备作为源处于一致状态时，无法执行 symclone 增量建立。

Dit artikel is van toepassing op Dit artikel is niet van toepassing op Dit artikel is niet gebonden aan een specifiek product. Niet alle productversies worden in dit artikel vermeld.
Bekijk andere hulpbronnen

Symptomen

当 SRDF 设备设置为异步模式时，R2 设备将处于一致状态，因此 symclone 建立将失败，如下所示： 
  
symrdf -g test_dg que 
  
Device Group (DG) Name       : test_dg
DG's Type                    : ANY
DG's Symmetrix ID            : 000xxxxxxxxx    (Microcode Version: 5876)
Remote Symmetrix ID          : 000yyyyyyyyy    (Microcode Version: 5876)
RDF (RA) Group Number        :  57 (38)         
Target (R2) View                         Source (R1) View     FLAGS
---------------------------------    ------------------------ ----- ------------
               ST                 LI       ST
Standard        A                  N        A
Logical  Sym    T R1 Inv  R2 Inv   K Sym    T R1 Inv  R2 Inv        RDF Pair
Device   Dev    E Tracks  Tracks   S Dev    E Tracks  Tracks  MCES  STATE
--------------------------------- -- ------------------------ ----- ------------
SRC01693  01693 WD      0       0 RW 04C32 RW       0       0 AX.E  Consistent
SRC03AA3 03AA3 WD       0       0 RW 02FCB RW       0       0 AX.E  Consistent 
Total             ------- -------             ------- -------
  Track(s)              0       0                   0       0
  MB(s)               0.0     0.0                 0.0     0.0 
Legend for FLAGS: 
(M)ode of Operation : A = Async, S = Sync, E = Semi-sync, D = Adaptive Copy Disk Mode
                    : W = Adaptive Copy WP Mode, M = Mixed, T = Active
(C)onsistency State : X = Enabled, . = Disabled, M = Mixed, - = N/A
(E)xempt            : X = Enabled, . = Disabled, M = Mixed, - = N/A
R1/R2 Device (S)ize : E = R1 EQ R2, 1 = R1 GT R2, 2 = R2 GT R1, - = N/A
symclone -g test_dg   establish -consistent -tgt 
  
Execute 'Incremental Establish' operation for device group
'test_dg' (y/[n]) ? y 
'Incremental Establish' operation execution is in progress for
device group 'test_dg'. Please wait... 

The request is not allowed for SRDF/A-capable devices in async mode

Oorzaak

当异步模式下的 R2 设备用作克隆源时，symclone establish 命令会失败
，因为“establish”会彼此之间执行“重新创建/激活”时刻。预拷贝绝不会有机会生效。

但是-precopy 或 -copy 可用于在创建克隆拷贝时维护 SRDF/A 一致性会话。

Oplossing

要创建一致的克隆拷贝，请分开单独执行“重新创建/激活”命令，而不是将两个操作同时包含的单个建立命令。

下面的示例： 
  
symclone -g "test_dg" recreate -precopy -tgt
symclone -g "test_dg" activate -tgt -consistent

这将有效地取代 symclone establish。

Getroffen producten

PowerMax, Solutions Enabler Series, VMAX, VMAX All Flash, VMAX3 Series
Artikeleigenschappen
Artikelnummer: 000208281
Artikeltype: Solution
Laatst aangepast: 16 mei 2026
Versie:  2
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.