Selecteer een product om de relevantie van het artikel te controleren
Dit artikel is van toepassing op Dit artikel is niet van toepassing opDit artikel is niet gebonden aan een specifiek product.Niet alle productversies worden in dit artikel vermeld.
If a customer follows the instruction of the "Resolution" mentioned in the above VMware KB article, to disable the VMDQ loopback feature using the Intel esxi-plugin tool ("intnetcli"), an error "Device vmnicX is not supported" would be seen after issuing the suggested command:
The same failure exists on the Intel E810 card running on 22.5.7 firmware and icen 1.12.5.0 driver, or an earlier Firmware Driver combination under VMware ESXi 7.0.3 or 8.x.
Oorzaak
Intel E810 adapter on 1.12.5.0 or earlier icen driver does not support disabling the VMDQ loopback feature.
Oplossing
Fix:
Intel has provided the fix for disabling the VMDQ loopback feature in the icen driver 1.14.2.0 for both ESXi 7.x and 8.x.
Upgrade to this new driver with the corresponding firmware release plus install the Intel esxi-plugin tool ("intnetcli") 1.13.0.25.
Getroffen producten
Intel PRO Family of Adapters, PowerEdge R660, VMware ESXi 7.x, VMware ESXi 8.x