Artikelnummer: 000143006
SC Storage Customer Notification: Dell Storage Manager server setup fails with Error Turning on MPIO
Samenvatting: With Windows Server 2016, Error Turning on MPIO message is received in Dell Storage Manager.
Article content
Symptomen
In Windows Server 2016, the flag that gets set to indicate whether a feature is enabled or not doesn't get set until after a reboot. In Dell Storage Manager, when running the Server Setup wizard, the below error message will appear because the flag is not set.
Oplossing
Workaround:
Resolution:
The fix is in the March 2018 update 3B package KB 4088787 (which is a cumulative package).
To check for installed updates, use the PowerShell command: Get-HotFix |ft HotfixID, InstalledOn
- First install MPIO on systems running Windows Server 2016;
- Reboot the server;
- Validate MPIO is "Installed" by either:
- Running PowerShell command: get-windowsfeature multipath-io The "Install State" must show as "Installed".
- Checking the Windows Control Panel for MPIO
- Use Dell Storage Manager and run the Server Setup wizard.
Resolution:
The fix is in the March 2018 update 3B package KB 4088787 (which is a cumulative package).
To check for installed updates, use the PowerShell command: Get-HotFix |ft HotfixID, InstalledOn
Artikeleigenschappen
Getroffen product
Entry Level & Midrange, Compellent (SC, SCv & FS Series), Dell Compellent SC4020, Dell Storage SC8000, Dell Compellent Series 40, Dell Storage SCv2000, Dell Storage SCv2020, Dell Storage SCv2080, Dell Storage SC5020, Dell Storage SC5020F
, Dell Storage SC7020, Dell Storage SC7020F, Dell Storage SC9000, Dell Storage SCv3000, Dell Storage SCv3020
...
Datum laatst gepubliceerd
21 feb. 2021
Versie
3
Artikeltype
Solution