Statiske ruter for Dell Networking SONiC IPv4 og IPv6
Samenvatting: Denne artikkelen forklarer hvordan du konfigurerer statiske ruter i Dell SONiC Management Framework CLI.
Dit artikel is van toepassing op
Dit artikel is niet van toepassing op
Dit artikel is niet gebonden aan een specifiek product.
Niet alle productversies worden in dit artikel vermeld.
Instructies
|
Forutsetninger for artikkelen Denne artikkelen bruker en svitsj som kjører Dell SONiC 4.1. Vi bruker standard grensesnittnavn i konfigurasjonen. Hvis du vil vite mer om ulike navnemoduser for grensesnitt i Dell SONiC, kan du se Dell-artikkelen 202172 Dell Networking S-serien: Grunnleggende grensesnittkonfigurasjon – SONiC 4.0 |
Indeks
IntroduksjonStatisk IPv4-rute Statisk IPv6-rute
Innledning
Konfigurere faste, statiske ruter for å sikre at rutet trafikk kan byttes med en angitt målenhet. Bruk for eksempel en statisk rute som sikkerhetskopiering i tilfelle en dynamisk rute ikke er tilgjengelig, eller for å nå en nettverksgateway hvis ingen annen rute er tilgjengelig.Designforslag for statisk rute:
- Kontroller at det ikke er noen overlappende statiske ruter i samme VRF
- Neste rekkevidde for hopp må sikres for rutingtrafikk
Statisk IPv4-rute
Konfigurasjonssyntaks:
admin@sonic:~$ sonic-cli
sonic# configure
sonic(config)# ip route [vrf vrf-name] dest-ip-prefix {next-hop-ip [interface interfacetype interface-number] | interface interface-type interface-number | blackhole} [nexthopvrf vrf-name] [tag tag-name] [track id] [dest-metric] |
Forklaring: Hvis du vil konfigurere en statisk IPv4-rute, angir du måladresseprefikset og disse valgfrie verdiene:
|
IPv4-eksempelkonfigurasjon
admin@sonic:~$ sonic-cli sonic# configure sonic(config)# ip route 6.6.6.6/32 5.5.5.1 sonic(config)# ip route 7.7.7.7/32 blackhole 100 sonic(config)# ip route 4.4.4.0/24 4.4.4.1 nexthop-vrf Vrf-GREEN 200 sonic(config)# ip route vrf Vrf-RED 3.3.3.0/24 10.0.0.2 nexthop-vrf Vrf-GREEN sonic(config)# ip route vrf Vrf-RED 8.8.8.0/24 interface Eth1/4 nexthop-vrf Vrf-GREEN 36 |
Kontroller statiske IPv4-ruter
Bruk kommandoen show ip route static (vis ip-rute) eller show ip route (vis IP-rute ) for å se statisk IPv4-rute i standard rutingtabell.Bruk kommandoen show ip route vrf eller vis ip route vrf static for å se statisk IPv4-rute i standard rutingtabell.
sonic# show ip route static Codes: K - kernel route, C - connected, S - static, B - BGP, O - OSPF > - selected route, * - FIB route, q - queued route, r - rejected route Destination Gateway Dist/Metric Last Update -------------------------------------------------------------------------------------------------------------------------------- S>* 4.4.4.0/24 via 4.4.4.1 Eth1/6(vrf Vrf-GREEN) 200/0 00:54:46 ago S>* 6.6.6.6/32 via 5.5.5.1 Eth1/5 1/0 01:09:10 ago S>* 7.7.7.7/32 Unreachable (blackhole) 100/0 01:23:19 ago |
sonic# show ip route vrf Vrf-RED
Codes: K - kernel route, C - connected, S - static, B - BGP, O - OSPF
> - selected route, * - FIB route, q - queued route, r - rejected route
Destination Gateway Dist/Metric Last Update
--------------------------------------------------------------------------------------------------------------------------------
S>* 3.3.3.0/24 via 10.0.0.2 Eth1/9(vrf Vrf-GREEN) 1/0 00:00:17 ago
S>* 8.8.8.0/24 Direct Eth1/4(vrf Vrf-GREEN) 36/0 01:00:35 ago |
Statisk IPv6-rute
Konfigurasjonssyntaks:
admin@sonic:~$ sonic-cli
sonic# configure
sonic(config)# ipv6 route [vrf vrf-name] dest-ipv6-prefix {next-hop-ipv6 [interface interface-type interface-number] | interface interface-type interface-number | blackhole} [nexthop-vrf vrf-name] [tag tag-name] [track id] [dest-metric] |
Forklaring: Hvis du vil konfigurere en statisk IPv6-rute, angir du måladresseprefikset og disse valgfrie verdiene:
|
IPv6-eksempelkonfigurasjon
admin@sonic:~$ sonic-cli sonic# configure sonic(config)# ipv6 route 3030::3300/120 3030::3301 36 sonic(config)# ipv6 route 2001:db6::/32 interface Eth1/7 150 sonic(config)# ipv6 route 2006::/24 blackhole 200 sonic(config)# ipv6 route vrf Vrf-RED 1001::/24 interface Eth1/4 nexthop-vrf Vrf-GREEN 20 sonic(config)# ipv6 route vrf Vrf-RED 1002::/24 interface Eth1/2 nexthop-vrf Vrf-GREEN 50 |
Kontroller statiske IPv6-ruter
Bruk kommandoen show ipv6 route static eller show ip route (vis IP-rute ) for å se statisk IPv6-rute i standard rutingtabell.Bruk kommandoen show ipv6 route vrf static for å se statisk IPv6-rute i standard rutingtabell.
sonic# show ipv6 route static Codes: K - kernel route, C - connected, S - static, B - BGP, O - OSPF > - selected route, * - FIB route, q - queued route, r - rejected route Destination Gateway Dist/Metric Last Update -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- S>* 2001:db6::/32 Direct Eth1/7 150/0 00:01:07 ago S>* 2006::/24 Unreachable (blackhole) 200/0 00:19:06 ago S 3030::3300/120 via 3030::3301 36/0 00:08:52 ago |
sonic# show ipv6 route vrf Vrf-RED static
Codes: K - kernel route, C - connected, S - static, B - BGP, O - OSPF
> - selected route, * - FIB route, q - queued route, r - rejected route
Destination Gateway Dist/Metric Last Update
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S>* 1001::/24 Direct Eth1/4(vrf Vrf-GREEN) 20/0 00:14:44 ago
S> 1002::/24 Direct Eth1/2(vrf Vrf-GREEN) 50/0 00:14:30 ago |
Getroffen producten
Enterprise SONiC Distribution, PowerSwitch E3200-ON Series, Dell EMC Networking N3200-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON
, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON
...
Artikeleigenschappen
Artikelnummer: 000218054
Artikeltype: How To
Laatst aangepast: 25 jun. 2025
Versie: 5
Vind antwoorden op uw vragen via andere Dell gebruikers
Support Services
Controleer of uw apparaat wordt gedekt door Support Services.