Damos-lhe as boas-vindas
Damos-lhe as boas-vindas à Dell
Minha conta
- Efetuar encomendas de forma rápida e fácil
- Ver todas as encomendas e controlar o seu estado de expedição
- Criar e aceder a uma lista dos seus produtos
- Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Número do artigo: 000141313
PowerEdge PSU: How to remove or replace a Power Supply Unit
Resumo: Step by step instructions to remove and replace the Power Supply Unit (PSU).
Conteúdo do artigo
Sintomas
Note: This article is part of the Server Tutorials: "Power Supply" available here .
Replacing a power supply unit is a simple action. If the server has two power supplies configured in redundant mode, which is the default setting, you can remove one of them without shutting down the server.
The remaining power supply will continue to provide the power to the server. In general, all components with an amber removal tool can be unplugged while the server is powered on.
Warning: The system requires one power supply for normal operation. On power-redundant systems, remove and replace only one power supply at a time in a system that is powered on.
- Disconnect the power cable from the power source and from the power supply unit you intend to remove, and then remove the cables from the strap.
- Press the release latch and slide the power supply unit out of the chassis.
| 1. | release latch |
| 2. | power supply unit cable connector |
| 3. | power supply unit |
| 4. | connector |
| 5. | power supply unit handle |
To insert the new power supply, just insert the block in the slot. This operation can be done while the server is powered on.
Causa
-
Resolução
-
Mais informações
Related video: Removing a PowerEdge Power Supply Unit QuickTips
Propriedades do artigo
Produto afetado
PowerEdge
Data da última publicação
13 out. 2023
Versão
7
Tipo de artigo
Solution