Connectrix B-Series Firmware: FOS user authentication works but has no permissions when configuring authentication
Сводка: While configuring the Brocade switch for tacacs+ user authentication. User is then pointing to a tacacs+ server application called tacacs.net. User authentication passes but user is unable to run any commands. ...
Данная статья применяется к
Данная статья не применяется к
Эта статья не привязана к какому-либо конкретному продукту.
В этой статье указаны не все версии продуктов.
Инструкции
Symptom: User logs in correctly but has no user permissions to run any commands.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Затронутые продукты
ConnectrixПродукты
Connectrix B-Series HardwareСвойства статьи
Номер статьи: 000022769
Тип статьи: How To
Последнее изменение: 07 Jan 2026
Версия: 4
Получите ответы на свои вопросы от других пользователей Dell
Услуги технической поддержки
Проверьте, распространяются ли на ваше устройство услуги технической поддержки.