PowerEdge: 16G - VPD access failed in RHEL kernel log for 24x2.5 NVMe Gen5 switch backplane
Сводка: Observed "VPD access failed" in Red Hat Enterprise Linux (RHEL) kernel log for (CPU Direct Attach) 24x2.5 NVMe Gen5 switch backplane.
Данная статья применяется к
Данная статья не применяется к
Эта статья не привязана к какому-либо конкретному продукту.
В этой статье указаны не все версии продуктов.
Симптомы
PowerEdge 16G platforms with 24x2.5 NVMe switch active backplane, the following error message is logged in the kernel log, as shown in Figure 1.
Figure 1: Kernel log with "VPD access failed."
Причина
This issue is not related to hardware or firmware and does not affect any functional behavior of the backplane.
Support of Vital Product Data (VPD) capability is optional, and the NVMe switch active backplane does not implement this feature.
Support of Vital Product Data (VPD) capability is optional, and the NVMe switch active backplane does not implement this feature.
Разрешение
This is working as designed.
Затронутые продукты
PowerEdge R760, PowerEdge R760XA, PowerEdge R760xd2, PowerEdge R760xs, PowerEdge R7625, Red Hat Enterprise Linux Version 9, Red Hat Enterprise Linux Version 8Свойства статьи
Номер статьи: 000223372
Тип статьи: Solution
Последнее изменение: 13 Jan 2026
Версия: 3
Получите ответы на свои вопросы от других пользователей Dell
Услуги технической поддержки
Проверьте, распространяются ли на ваше устройство услуги технической поддержки.