Номер статьи: 000136288
iDRAC - How to set the iDRAC Thermal Base Algorithm via CLI
Сводка: -
Содержание статьи
Симптомы
The following article provides information about setting iDRAC Thermal Base Algorithm via CLI.
Note: This article is part of the Server Tutorials: Support Tools, available Here
How do I set the iDRAC Thermal Base Algorithm via CLI?
Steps:
Modifying the Thermal Base Algorithm via DM, RACADM, WS-MAN.
Low Fan Offset:
ipmitool -H <ip address> -U root -P calvin 0x30 0xce 0 0x9 7 0 0 0 7 0 0 2 0xff 0 0
High Fan Offset:
ipmitool -H <ip address> -U root -P calvin 0x30 0xce 0 0x9 7 0 0 0 7 0 0 2 0xff 1 0
Default/None Fan Offset:
ipmitool -H <ip address> -U root -P calvin 0x30 0xce 0 0x9 7 0 0 0 7 0 0 0 0xff 0 0
IPMI Spec for thermal settings:
| 0xCE | Power/Thermal management | Request: Byte1: Get/Set command 0x0: Set command 0x1: Get command Byte 2: Subcommand 0x00 = System Power Capacity 0x01 = Physical topology 0x02 = Thermal limit (RTS+ feature) 0x03 = Get Active Power Policy 0x04 = PSU RapidOn 0x05 = PSU/system capability 0x06 = PSU PFC 0x07 = Get Re-characterization Status 0x08 = Characterization Progress 0x09 = Thermal Setting 0x0a = Get temperature sensor number 0x0b = Power Simulator Configuration 0x0c = Power Control on Sub-devices 0x0d = VR Configuration 0x0e = Get Temperature Reading 0x0f = Get Power Reading Byte 3-4: Data length. LSB first. Byte 5-6: Offset. LSB first. Byte 7-N: Command Data Structure Response: Byte 1: Generic Completion Code plus 6Fh: Not licensed (need LM_POWER_MONITORING or LM_POWER_BUDGETING) Byte 2: Subcommand Byte 3-4: Data length. LSB first. Byte 5-6: Offset. LSB first. Byte 7-N: Command Data Structure -------------------------------------------------------------------------------------------------------- Thermal setting (0x09) Note: Communication mechanism is USC sets to iDRAC. - Set Request: Byte 7-8: Total Payload Length (inc. these 2) Byte 9: thermal base algorithm 0x00: Auto (default) 0x01: Maximum performance(Performance optimized) 0x02: Minimum power (Performance per watt optimized) 0x03: Acoustic Optimized (Acoustic Mode) Byte 10: User Options 0x00: none/ default 0x01: Average Air Exhaust Temp 0x02: Fan speed offset 0x03: CPU Optimized Byte 11: Average Air Exhaust Temp values, only valid when appropriate User Option selected 0x00: Max air exhaust temp 40 0x01: Max air exhaust temp 45 0x02: Max air exhaust temp 50 0x03: Max air exhaust temp 55 0xFF: N/A Byte 12: Fan speed offset, only valid when appropriate User Option selected 0x00: Low Fan speed offset 0x01: High Fan speed offset Byte 13: NDC temp value (unsigned) - TBD Response: None - Get Request: None Response: Byte 7-8: Total Payload Length (inc. these 2) Byte 9: thermal base algorithm 0x00: Auto (default) 0x01: Maximum performance(Performance optimized) 0x02: Minimum power (Performance per watt optimized) 0x03: Acoustic Optimized (Acoustic Mode) Byte 10: User Options 0x00: none/ default 0x01: Average Air Exhaust Temp 0x02: Fan speed offset 0x03: CPU Optimized Byte 11: Average Air Exhaust Temp values 0x00: Average air exhaust temp 40 0x01: Average air exhaust temp 45 0x02: Average air exhaust temp 50 0x03: Average air exhaust temp 55 0xFF: N/A Byte 12: Fan speed offset 0x00: Low Fan speed offset 0x01: High Fan speed offset Byte 13: NDC temp value (unsigned) – TBD Byte 14: Platform Support Bit 0: Acoustic Mode 1: Supported 0: Not Supported Bit 1: Average Air Exhaust Temp 1: Supported 0: Not Supported Bit 2: Fan Speed Offset 1: Supported 0: Not Supported Bit 3: CPU Optimized 1: Supported 0: Not Supported Bit 4: Average Air Exhaust Temp 40 1: Supported 0: Not Supported Bit 5: Average Air Exhaust Temp 45 1: Supported 0: Not Supported Bit 6: Average Air Exhaust Temp 50 1: Supported 0: Not Supported Bit 7: Average Air Exhaust Temp 55 1: Supported 0: Not Supported |
Причина
-
Разрешение
-
Свойства статьи
Затронутый продукт
Servers, PowerEdge, iDRAC6
Дата последней публикации
06 дек. 2021
Версия
6
Тип статьи
Solution