Ana içeriğe atla
Oturumu Kapat

Dell'e Hoş Geldiniz

Hesabım
  • Hızla ve kolayca sipariş verin
  • Siparişleri görüntüleyin ve kargonuzun durumunu izleyin
  • Ürünlerinizin listesini oluşturun ve listeye erişin
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Oturum Aç Hesap oluşturun Premier Oturum Açma İş Ortağı Programı Oturum Açma
Bize Ulaşın

Article Number: 000019776

VNX1/VNX2: How to find serial number on a VNX array (User Correctable)

Summary: VNX1/VNX2: How to find serial number on a VNX array

Article Content

Instructions

How to find serial number on a VNX1 or VNX2 array.

There are 2 ways to obtain the serial number on the VNX array.
  1. Unisphere
    1. Login to Unisphere GUI 
    2. Select the array
    3. Serial number can be found under "System Information" on "Dashboard"
kA53a0000004MeiCAE_1_0
 
  1. CLI:
    1. For Unified array, login to control station and run the following command: /nas/sbin/serial
Example: 

[nasadmin@CS0 ~]$ /nas/sbin/serial
APM00111001117

  1. For block-only array, run the following command from workstation command prompt. The command below requires "Navisphere CLI" software installed onto the workstation: 
Command: naviseccli -h <SPA_or_SPB_IP> -user <system_user> -password <system_password> -scope 0 getagent
Example:
C:\ naviseccli -h 123.123.123.123 -user ka_ds -password 1234 -scope 0 getagent

Agent Rev:           7.33.9 (2.31)
Name:                K10
Desc:
Node:                A-APM00111001117
Physical Node:       K10
Signature:           3555924
Peer Signature:      3555337
Revision:            05.33.009.5.231
SCSI Id:             0
Model:               VNX5400
Model Type:          Rackmount
Prom Rev:            33.51.00
SP Memory:           16384
Serial No:           APM00111001117
SP Identifier:       A
Cabinet:             DPE9

Article Properties

Affected Product

VNX2 Series

Product

VNX1 Series, VNX2 Series

Last Published Date

20 Kas 2020

Version

2

Article Type

How To

Üste Dön