OneFS: Isilon Drive Support Package installation failed

摘要: Isilon Drive Support Package (DSP) fails during installation and returns "DSP Install Failed, 102.917784929 sec elapsed" and "ERROR: No logdata lines for 2015-03-23 12:59:40 or later"

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。

症状

The article describes how to work around a failure to install the Isilon Drive Support Package.

Installing Isilon Drive Support Package 1.x fails with the following output:
 

Cluster# isi_dsp_install /ifs/data/Isilon_Support/dsp/Drive_Support_v1.4.tar
Installed Drive_Support_v1.4
WARNING: /ifs/data/Isilon_Support/dsp/Drive_Support_v1.4.tar is not installed
ERROR: No logdata lines for 2015-03-23 10:25:13 or later
DSP Install Failed, 103.589804888 sec elapsed

 

原因

This error is caused when a Field Replaceable Unit (FRU) package that' is installed on one of the nodes of the cluster.
 

解决方案

 Remedy for this issue is to remove FRU package from all nodes on the cluster.
 

  1. Confirm that there is a FRU package installed on at least one node of the cluster:
isi_for_array "isi pkg info --forced_local | grep IsiFru_Package"
  1. Remove the FRU package from all nodes:
isi_for_array "isi pkg delete --forced_local IsiFru_Package_<timestamp_from_step_1>"
  1. Install the Isilon Drive Support Package now:
isi_dsp_install Drive_Support_v<version>.tar

 

受影响的产品

Isilon, PowerScale OneFS
文章属性
文章编号: 000075738
文章类型: Solution
上次修改时间: 16 7月 2026
版本:  6
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。