VxRail: Event Code: VXR508STOR372
摘要: Event Code VXR508STOR372 triggers due to unmap being disabled or not supported on the controller.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
Event Code VXR508STOR372 indicates: Unable to create the unmap-enabled Virtual Drive (VD) <Virtual Drive FQDD> because either the controller is not unmap-capable or the controller's unmap state is disabled.
原因
The unmap-enabled Virtual Drive (VD) identified in the message cannot be created because either the controller is not unmap-capable or the controllers unmap state is disabled.
解决方案
Verify that the controller supports the unmap feature and the controller unmap state is enabled.
To check, run the following RACADM command at the Command-Line Interface (CLI):
racadm storage get controllers -o -p UnmapSupport,UnmapState
其他信息
If unmap is supported but not enabled, see VxRail: How to enable TRIM/UNMAP on vSAN for space reclamation to enable unmap.
受影响的产品
VxRail, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail D560, VxRail D560F, VxRail E Series Nodes, VxRail E560, VxRail E560F, VxRail E560N, VxRail E660, VxRail E660F, VxRail E660N, VxRail E665, VxRail E665F, VxRail E665N
, VxRail G560, VxRail G560F, VxRail P Series Nodes, VxRail P570, VxRail P570F, VxRail P580N, VxRail P670F, VxRail P670N, VxRail P675F, VxRail P675N, VxRail S Series Nodes, VxRail S570, VxRail S670, VxRail Software, VxRail V Series Nodes, VxRail V570, VxRail V570F, VXRAIL V670F, VxRail VD-4510C, VxRail VD-4520C, VxRail VD Series Nodes, VxRail VE-660, VxRail VE-6615, VxRail VE-670, VxRail VP-760, VxRail VP-7625, VxRail VP-770, VxRail VS-760
...
文章属性
文章编号: 000189231
文章类型: Solution
上次修改时间: 01 5月 2026
版本: 6
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。