PowerFlex: Resource Group (RG) displayed incorrect switch mapping during the upgrade.
摘要: This article explains how to fix RG displayed incorrect switch mapping during the upgrade.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
RG port details showed switches 2 and 3 instead of the correct switches 4 and 5, causing MTU warnings
原因
The PowerFlex Manager service retained outdated NIC cabling data, causing it to reference the wrong switches in the RG mapping
解决方案
Applied the corrective steps in article PowerFlex: Deployment Fails -Network Configuration Mismatch - interfaces are connected to the same switch to purge the stale NIC cabling data, which refreshed the RG mapping and correctly displayed switches 4 and 5
受影响的产品
PowerFlex rack, ScaleIO文章属性
文章编号: 000492472
文章类型: Solution
上次修改时间: 28 7月 2026
版本: 1
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。