OpenManage Switch Administrator to change the Privileged Exec (enable) password

摘要: Use OpenManage Switch Administrator to change the Privileged Exec (enable) password on the 3500, 5500, 6200, 7000, 8000, 8100, N2000, N3000, N4000 series switches

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

說明

Article Summary:  This article provides the necessary steps to add or change the Privileged Exec password from the web interface.

Discussion:  Some firmware releases may not have required an enable password to be set when using telnet or SSH for switch management.  If firmware is upgraded such that an enable password is required, it can be set via console or via the web interface.  This article outlines the procedure for setting the enable password via the web interface.

1.  Open the Dell OpenManage Switch Administrator web interface by entering the IP address of the switch in your web browser.  Expanding the directories can be done by clicking on the title of each directory, clicking on the + symbol to each category’s title, or clicking directly on each of the options within the main window.

2.  Navigate through:  System > Management Security > Enable Password

3.  Enter a new Enable password and click Apply.

Note: The 3500 and 5500 series switches may require entering an Enable Access Level. The default value of 1 only gives read access. Select 15 to give read/write access.

4.  Save the configuration: Click on the diskette icon at the top of the window and acknowledge the warning.

Note: A 6200 series switch does not have a save icon. Navigate through: System > File Management > Copy Files. Select Copy Configuration, verify Source: Running Config and Destination: Startup Config, then select Apply Changes.

 

受影響的產品

PowerSwitch N3000 Series, PowerSwitch N4000 Series, PowerConnect 3524, PowerConnect 3524P, PowerConnect 3548, PowerConnect 3548P, PowerConnect 5524, PowerConnect 5524P, PowerConnect 5548, PowerConnect 5548p, PowerConnect 6224, PowerConnect 6224F , PowerConnect 6224P, PowerConnect 6248, PowerConnect 6248P, PowerConnect 7024, PowerConnect 7024F, PowerConnect 7024P, PowerConnect 7048, PowerConnect 7048P, PowerConnect 7048R, PowerConnect 8100 Series ...
文章屬性
文章編號: 000120168
文章類型: How To
上次修改時間: 16 10月 2025
版本:  5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。