How to Reseat the Keycap when a Key Falls Off the Laptop Keyboard

摘要: The following article explains how to reseat the keycap when a key falls off the keyboard on a Laptop.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

說明

Reseating the keycap

It is possible for the keycap on the internal keyboard to get stuck or come off while using a laptop. To put the keycap back on the keyboard, run through the following steps.

You can reseat a loose keycap:

  1. Align it with the scissored spring underneath.
  2. Press down with your finger until the keycap snaps back into place. See Figure 1.

SLining Up a Keycap and Pressing Down

NOTE: You might be required to wiggle your finger back and forth for the keycap to snap down on the scissor spring. There are two snaps, one at the top and one at the bottom of the key.
  1. Where there is a scissor support bar that is loose, clip the lower part of the bar on first under the bottom scissor rail. 
  2. Snap the upper part over the top scissor rail.
  3. Line up the keycap to reattach it. See Figure 2.

Clipping the Support Bar Under the Bottom Rail

You can learn more about the Dell Service Descriptions at this page:

NOTE: Did the above instructions fail to resolve your issue? Are your keyboard keys popped, broken, damaged, or lost? Use the following link to contact Dell Support:

受影響的產品

Chromebook, G Series, Alienware, Dell Laptops, Dell Plus, Dell Pro, Dell Pro Max, Dell Pro Plus, Dell Pro Premium, Inspiron, Latitude, Dell Pro Rugged, Vostro, XPS, Legacy Laptop Models, Mobile Workstations, Dell Pro Max 16 XE MC16250
文章屬性
文章編號: 000133100
文章類型: How To
上次修改時間: 19 4月 2026
版本:  8
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。