DLMF: Dialhome received with error: DLmV0198E: Get SEL Info command failed
摘要: dial home received with error DLMF-DLmV0198E-Get-SEL-Info-command-failed on VTE1
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
Dial home received with error message:
LMF-DLmV0198E-Get-SEL-Info-command-failed
This is seen at DLm Release 5.0.3 through 5.1.1, but may affect more versions.
Check /var/log/messages on that VTE:
vte1:/var/log # cat /var/log/messages | grep "Get SEL"
2020-05-07T15:22:51.616010-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:16.630471-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:41.642472-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:06.654503-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:18.674316-04:00 vte1 ipmievd: Get SEL Info command failed: Unspecified error
2020-05-07T15:24:28.674396-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:38.674516-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:48.674616-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:58.674727-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:08.674831-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:18.674939-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:28.675063-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:38.675167-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
vte1:/var/log #
2020-05-07T15:22:51.616010-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:16.630471-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:41.642472-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:06.654503-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:18.674316-04:00 vte1 ipmievd: Get SEL Info command failed: Unspecified error
2020-05-07T15:24:28.674396-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:38.674516-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:48.674616-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:58.674727-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:08.674831-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:18.674939-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:28.675063-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:38.675167-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
vte1:/var/log #
原因
Failure to disconnect virtual media during after the manufacturing process.
解析度
In the cases examined, the issue occurred and stopped within seconds and did not repeat the same day. Further checking confirmed it did not repeat within the next 7 days.
Workaround:
Check if VTE iDRAC has Virtual Media attached on the VTE where the ipmievd error occurred by running the below command:
# racadm get idrac.Virtualmedia.attached
Examples:
If Virtual Media is *not* attached:
A workaround (non disruptive iDRAC internal settings modification only) to prevent further occurrence, is to detach Virtual Media. Execute the following on the VTE with the error:
Workaround:
Check if VTE iDRAC has Virtual Media attached on the VTE where the ipmievd error occurred by running the below command:
# racadm get idrac.Virtualmedia.attached
Examples:
If Virtual Media is attached:
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Attached
If Virtual Media is *not* attached:
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=AutoAttach OR Attached=Detached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=AutoAttach OR Attached=Detached
A workaround (non disruptive iDRAC internal settings modification only) to prevent further occurrence, is to detach Virtual Media. Execute the following on the VTE with the error:
vte1:~ # racadm set idrac.Virtualmedia.attached 0
[Key=idrac.Embedded.1#VirtualMedia.1]
Object value modified successfully
Verify:o
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Detached
[Key=idrac.Embedded.1#VirtualMedia.1]
Object value modified successfully
Verify:o
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Detached
受影響的產品
Disk Library for mainframe產品
Disk Library for mainframe, Disk Library for mainframe DLm8500, Disk Library for mainframe Software文章屬性
文章編號: 000173590
文章類型: Solution
上次修改時間: 20 11月 2020
版本: 2
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。