MFE zDP：如果執行的 VDG 具有三個以上的儲存系統，執行時間可能會失敗，並出現 ABEND S0C4-10
摘要: 在 START VDG 後，針對三個 VMAX3 的 VDG 定義，中止 S0C4-10。
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
START VDG 經驗 SYSTEM COMPLETION CODE=0C4 REASON CODE=00000010。
手續：
1) define VDG with DEBUG(SNAP) and devices on several V3's 2) start this VDG in SCF Resulting S0C4 RC 10: SCF0740I ZDP,START QZ0A245 SCF0741I ZDP START command accepted SCF0746I ZDP VDG QZ0A245 Started EIP0200I *** Dell EMC zDP - V10.0. (000) - Thursday, September 16, 2021 *** EIP0260I VDG QZ0A245, Options: 01011000,81150005,07001000,00000000 EIP0201I VDG QZ0A245, Beginning cycle 2 EIP0217I VDG QZ0A245, Devices validated for consistency, via ECA ECFIIK8F ESNAZDPL ABEND INFORMATION - SDWA@ 29E1B178 ECFIIK8F ESNAZDPL PSW: 078C0000 A25B6032 - 41505000 1744BF41 5000BF7F ECFIIK8F ESNAZDPL R00-R03: 2C586DD8 00000006 00000007 7CF83000 ECFIIK8F ESNAZDPL R04-R07: 00000000 30E10000 2C5A9498 2A72D760 ECFIIK8F ESNAZDPL R08-R11: 2259D6D0 7CF74D88 2C586610 225BCFB0 ECFIIK8F ESNAZDPL R12-R15: 225B5FE8 00274700 2C5D5010 2C5DAD70 IEA995I SYMPTOM DUMP OUTPUT SYSTEM COMPLETION CODE=0C4 REASON CODE=00000010 TIME=05.11.32 SEQ=00803 CPU=0000 ASID=00A3 PSW AT TIME OF ERROR 078C0000 A25B6032 ILC 4 INTC 10 NO ACTIVE MODULE FOUND NAME=UNKNOWN DATA AT PSW 225B602C - 41505000 1744BF41 5000BF7F GR 0: 00010000_2C586DD8 1: 00000000_00000006 2: 00000000_00000007 3: 00000000_7CF83000 4: 00000000_00000000 5: 00000000_30E10000 6: 00000000_2C5A9498 7: 00000000_2A72D760 8: 00000000_2259D6D0 9: 00000000_7CF74D88 A: 00000000_2C586610 B: 00000000_225BCFB0 C: 00000000_225B5FE8 D: 00000000_00274700 E: 00000000_2C5D5010 F: 00000000_2C5DAD70 END OF SYMPTOM DUMP IEA993I SYSMDUMP TAKEN TO IKOLYK1.SYSMDUMP.K123 ECFIIK8F ESNAZDPL EQCA199S ABEND S0C4 OCCURRED ECFIIK8F ESNAZDPL CONTROLLER: SSID:0000 DEVICE:00000000 CCUU:6900 MICROCODE: 0000 ECFIIK8F ESNAZDPL STACK @ 00274700 00274700 2C5D5010 00000000 ECFIIK8F ESNAZDPL R14..R01 - 00000000 00000000 00000000 00000000 ECFIIK8F ESNAZDPL R02..R05 - 00000000 00000000 00000000 00000000 ECFIIK8F ESNAZDPL R06..R09 - 00000000 00000000 00000000 00000000 ECFIIK8F ESNAZDPL R10..R12 - 00000000 00000000 00000000 ECFIIK8F ESNAZDPL STACK @ 2C5D5010 00274700 00271F80 00274700 ECFIIK8F ESNAZDPL ENTRY POINT @ 225B5FE8 SUBTASK_ATTACH + 00000000 ECFIIK8F ESNAZDPL RETURN TO A259CDAC ESNAZDPL + 000006DC ECFIIK8F ESNAZDPL R14..R01 - A259CDAC 225B5FE8 2C586DD8 00000006 ECFIIK8F ESNAZDPL R02..R05 - 00000007 7CF83000 256CAE80 00000000 ECFIIK8F ESNAZDPL R06..R09 - 2C5A9498 2A72D760 2259D6D0 7CF74D88 ECFIIK8F ESNAZDPL R10..R12 - 2C586610 225BCFB0 2259C6D0 ECFIIK8F EQCA199S ABEND S0C4 OCCURRED EIP0236W VDG QZ0A245, SnapVX call failed, RC 00C7 EIP0281I VDG QZ0A245, Waiting before a retry is performed
原因
zDP 多工作業啟動失敗。
解析度
修正：
- 針對 Mainframe Enablers 8.5，已開發 PTF SN85049 來修正此問題。可從 Dell 線上支援下載。
- 針對 Mainframe Enablers 8.4，已開發 PTF SN84081 來修正此問題。可從 Dell 線上支援下載。
其他資訊
處理 PTF （從 PTF 封面備註）：
++PTF(SN85049) REWORK(2021278) . ++VER(Z038) FMID(SSNP850) PRE( SN85048 ) /* *------------------------------------------------------------- * PROBLEM DESCRIPTION(S): * ------------------------------------------------------------ * PROBLEM FIXED: OPT 592226 * USERS AFFECTED: zDP users * PROBLEM DESCRIPTION: zDP run-time may fail with ABENDS0C4-10 * DESCRIPTION DETAIL: * * zDP run-time may fail with ABENDS0C4-10 if processing a VDG * which includes more than 3 storage systems. * * PROBLEM RESOLUTION: * * zDP run-time has been updated to perform multi-tasking * activate correctly. * * MODULES: EMCQCAPL * ESNAZDPL * * ------------------------------------------------------------ ++PTF(SN84081) REWORK(2021270) . ++VER(Z038) FMID(SSNP840) PRE( SN84080 ) /* *------------------------------------------------------------- * PROBLEM DESCRIPTION(S): * ------------------------------------------------------------ * PROBLEM FIXED: OPT 592226 * USERS AFFECTED: zDP users * PROBLEM DESCRIPTION: zDP run-time may fail with ABENDS0C4-10 * DESCRIPTION DETAIL: * * zDP run-time may fail with ABENDS0C4-10 if processing a VDG * which includes more than 3 storage systems. * * PROBLEM RESOLUTION: * * zDP run-time has been updated to perform multi-tasking * activate correctly. * * MODULES: ESNAZDPL * * ------------------------------------------------------------ * SN84081 27 Sep 2021 07:14:46 * ------------------------------------------------------------ * OPT Summary * The following OPT was addressed by this PTF: * * 592226 * *-------------------------------------------------------------
受影響的產品
Mainframe Enablers文章屬性
文章編號: 000192999
文章類型: Solution
上次修改時間: 19 9月 2025
版本: 6
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。