VMware vRealize Aria Operations 在建立或刪除新物件期間回報記錄的錯誤

摘要: 在建立物件或刪除物件期間,記錄的 VMware Aria Operations 發生錯誤。不過,手術終於成功了。 觸發此問題的版本為 8.16.0,但可能不僅限於此版本。

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。

症狀

在現有儀錶板或新儀錶板上創建物件(如圖表)時,客戶將看到創建失敗。如果刪除某些圖表,刪除將失敗,但一段時間后,可以看到新儀錶板或現有儀錶板中的新圖表。

圖表操作失敗

創建欄位時,Web 圖形使用者介面將觸發“Cassandra 超時錯誤消息”,但一段時間后,客戶可以看到該字段已創建。

欄位建立逾時

記錄:
[2024-04-22 08:53:04.372+0000] ["CassandraClientParallelExecutor-thread-4152"/10.159.197.195 WARN] [com.vmware.loginsight.cassandra.CassandraClient] [Exception during asynchronous execution (3875612721059898833): Statement:(select guid, count from spock_cluster_counts where guid in ? and bucket = ? limit 1000000) java.util.concurrent.ExecutionException: com.datastax.oss.driver.api.core.servererrors.ReadTimeoutException: Cassandra timeout during read query at consistency QUORUM (2 responses were required but only 1 replica responded). In case this was generated during read repair, the consistency level is not representative of the actual consistency.]
java.util.concurrent.ExecutionException: com.datastax.oss.driver.api.core.servererrors.ReadTimeoutException: Cassandra timeout during read query at consistency QUORUM (2 responses were required but only 1 replica responded). In case this was generated during read repair, the consistency level is not representative of the actual consistency.



即使修改設定檔 /storage/core/loginsight/cidata/cassandra/config/cassandra.yaml 並將write_request_timeout值增加至 3000 毫秒,並為記錄服務重新開機 aria 作業,問題依然持續存在。

原因

Cassandra 集群存在一些問題。
嘗試在 Aria Operations 下建立記錄欄位時,收到逾時錯誤。
這將涉及用於管理欄位的特定 LI API。

解析度

若要解決此問題,請重新啟動 Aria Operations 記錄叢集中的所有裝置節點。

受影響的產品

OpenManage Management Pack for VMware Aria Operations
文章屬性
文章編號: 000224734
文章類型: Solution
上次修改時間: 16 5月 2025
版本:  3
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。