AccessContext
|
The AccessContext property identifies the role this RemoteServiceAccessPoint
is playing in the hosting system.
Possible values are:
- 0 = Unknown
- 1 = Other
- 2 = Default Gateway
- 3 = DNS Server
- 4 = SNMP Trap Destination
- 5 = MPLS Tunnel Destination
- 6 = DHCP Server
- 7 = SMTP Server
- 8 = LDAP Server
- 9 = Network Time Protocol (NTP) Server
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
|
AccessInfo
|
Access or addressing information or a combination of this
information for a remote connection. This information can be a host
name, network address, or similar information.
|
CreationClassName
|
Indicates the name of the class or the subclass used in
the creation of an instance. When used with the other key properties
of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
|
ElementName
|
A user-friendly name for the object. This property allows
each instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
-
NOTE: The Name property of
ManagedSystemElement is also defined as a user-friendly name. But,
it is often sub-classed to be a Key. It is not reasonable that the
same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances
of LogicalDevice), the same information can be present in both the
Name and ElementName properties.
|
EnabledDefault
|
An enumerated value indicating an administrator's default
or startup configuration for the Enabled State of an element.
Possible values are:
- 2 = Enabled
- 3 = Disabled
- 5 = Not Applicable
- 6 = Enabled but Offline
- 7 = No Default
- 9 = Quiesce
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
|
EnabledState
|
An integer enumeration that indicates the enabled and disabled
states of an element. It can also indicate the transitions between
these requested states.
Possible values are:
- 0 = Unknown
- 1 = Other
- 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new requests.
- 3 = Disabled — Indicates that the element will not execute commands
and will drop any new requests.
- 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
- 5 = Not Applicable — Indicates the element does not support being
enabled or disabled.
- 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
- 7 = In Test — Indicates that the element is in a test state.
- 8 = Deferred — Indicates that the element may be completing commands,
but will queue any new requests.
- 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
- 10 = Starting — Indicates that the element is in the process
of going to an Enabled state. New requests are queued.
- 11..32767 = DMTF Reserved
- 32768..65535 = Vendor Reserved
For example, shutting down (value =
4) and starting
(value =
10) are transient states between enabled and disabled.
|
InfoFormat
|
An enumerated integer that describes the format and interpretation
of the AccessInfo property.
Possible values are:
- 1 = Other
- 2 = Host Name
- 3 = IPv4 Address
- 4 = IPv6 Address
- 5 = IPX Address
- 6 = DECnet Address
- 7 = SNA Address
- 8 = Autonomous System Number
- 9 = MPLS Label
- 10 = IPv4 Subnet Address
- 11 = IPv6 Subnet Address
- 12 = IPv4 Address Range
- 13 = IPv6 Address Range
- 100 = Dial String
- 101 = Ethernet Address
- 102 = Token Ring Address
- 103 = ATM Address
- 104 = Frame Relay Address
- 200 = URL 201 = FQDN
- 202 = User FQDN
- 203 = DER ASN1 DN
- 204 = DER ASN1 GN
- 205 = Key ID .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
|
Name
|
The Name property uniquely identifies the ServiceAccessPoint
and provides an indication of the functionality that is managed. This
functionality is described in more detail in the Description property
of the object.
|
RequestedState
|
An integer enumeration that indicates the last requested
or desired state for the element, irrespective of the mechanism through
which it was requested. The actual state of the element is represented
by EnabledState. This property is provided to compare the last requested
and current enabled or disabled states.
-
NOTE: When EnabledState is
set to 5
(Not Applicable), then this property has no meaning.
See the EnabledState property description for explanations of the
values in the RequestedState enumeration.
-
NOTE: The value
No Change
(5)
has been deprecated instead of indicating the last requested
state is
Unknown (0). If the last requested or desired state
is unknown, RequestedState should have the value
Unknown (0), but may have the value
No Change (5).
There are
two new values in RequestedState that build on the statuses of EnabledState.
These are
Reboot (10) and
Reset (11).
Shut Down
requests an orderly transition to the Disabled state, and may involve
removing power, to completely erase any existing state. The Disabled
state requests an immediate disabling of the element, such that it
will not execute or accept any commands or processing requests. This
property is set as the result of a method invocation (such as Start
or StopService on CIM_Service), or can be overridden and defined as
WRITEable in a subclass. The method approach is considered superior
to a WRITEable property, because it allows an explicit invocation
of the operation and the return of a result code. If knowledge of
the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12
Not Applicable.
Possible values are:
- 0 = Unknown — Indicates the last requested state for the element
is unknown.
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change
- 6 = Offline — Indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
- 7 = Test
- 8 = Deferred
- 9 = Quiesce
- 10 = Reboot — Refers to doing a
Shut Down and then moving
to an
Enabled state.
- 11 = Reset — Indicates that the element is first
Disabled and then
Enabled.
- 12 = Not Applicable
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
|
SystemCreationClassName
|
The CreationClassName of the scoping System.
|
SystemName
|
The Name of the scoping System.
|
TransitioningToState
|
Indicates the target state to which the instance is transitioning.
A value other than 5 or 12 identifies the state to which the element
is in the process of transitioning.
Possible values are:
- 0 = Unknown
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change — Indicates that no transition is in-progress.
- 6 = Offline
- 7 = Test
- 8 = Defer
- 9 = Quiesce
- 10 = Reboot
- 11 = Reset
- 12 = Not Applicable — Indicates the implementation does not support
representing ongoing transitions
|