Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude E5550 / 5550 Owner's Manual

Removing the SmartCard Reader Board

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove the:
    1. base cover

    2. battery

    3. memory

    4. keyboard trim

    5. keyboard

    6. palmrest

  3. Perform the following steps:
    1. Disconnect the SmartCard reader board cable from the USH board [1] [2].
    2. Peel the cable to release from the adhesive [3].Figure displaying how to disconnect the SmartCard reader cable and how to peel the cable to release it from the adhesive.
  4. Release the SmartCard reader board. To release the SmartCard reader board:
    1. Remove the screws that secure the SmartCard-reader board to the palmrest [1].
    2. Push the SmartCard-reader board to release it [2].Figure displaying how to remove the screws that secure the SmartCard reader to the palmrest.
  5. Remove the SmartCard reader board from the palmrest.Figure displaying how to remove the SmartCard reader from the palmrest.

Rate this content

Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\