Dell Command | Monitor Version 9.1 Reference Guide

DCIM_ControllerView

Property	Description
BusType	The property represents the type of the PCI bus. Possible values are: 0 =Unknown 3 = PCI Bus 4 = PCMCIA Bus 0x8000 = DMTF Reserved 0xffff = Vendor Reserved
ControllerFirmwareVersion	This property represents the firmware version.
Device	This property represents the device name.
Driver Version	This property represents the version of the driver.
ElementName	A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information. NOTE: The Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often sub-classed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties.
InstanceID	This property contains the value of the Fully Qualified Device Description (FQDD).
PrimaryStatus	This property represents the status of the device. Possible values are: 0 = Unknown 1 = OK 2 = Degraded 3 = Error
ProductName	This property represents the family name of the controller.