Active System Manager Release 8.2 User’s Guide

You can use the port view feature to view network and Fibre channel connectivity for a particular server.

1. On the home page, click Resources.
2. Select a server that is in a Deployed state and click View Details on the right pane. The Resource Details page is displayed.
3. Click Port View. The following information is displayed on the Port View page:
   • Topology information for all networks and VLANs deployed in a service.
   • Network connections between the devices.
   • Health of the resources. For more information, see Resource health status .
   • Connection Details section with detailed information on the network devices.
   • Zone and zone configuration in the VLAN-Networks list for the FC connectivity.
   • NOTE: If you select a server that is not in a deployed state, only the interface card information is displayed.
   To view device details such as host name, model name, and management IP address, or information on associated devices, click the specific ports or devices. For example, to view the VLANs associated with specific partitions, click the partition to view the detail.
   • NOTE: To view information on intermediate devices in Port View, ensure that the devices are discovered and available in the inventory.
   To filter the information based on the connectivity, select an option from the Display Connections drop-down menu.
   • NOTE: The Show All Connections is the default option.