Dell Command | Monitor Version 9.1 Reference Guide

Indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and its subclasses to be uniquely identified.

An address or other identifying information used to uniquely name the LogicalDevice.

Identifies the category of data to be displayed on the LCD Panel.

Possible values are:

• 2 = None
• 3 = User Specified
• 4 = Default
• 5 = IPv4 Address
• 6 = IDRAC MAC Address
• 7 = Service Tag
• 8 = System Name
• 9 = IPv6 Address
• 10 = Ambient
• 11 = System Power

Contains a user configurable string to be displayed on the LCD panel if DisplayDataCategory has the value 3.

An enumerated value indicating an administrator's default or startup configuration for the Enabled State of an element.

Possible values are:

• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved

By default, the element is Enabled (value = 2).

An integer enumeration that indicates the enabled and disabled states of an element. It can also indicate the transitions between these requested states.

Possible values are:

• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or could be executing commands, will process any queued commands, and queues new requests.
• 3 = Disabled — Indicates that the element will not execute commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the process of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in the process of going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved

For example, shutting down (value = 4) and starting (value = 10) are transient states between enabled and disabled.

Indicates if the LCD panel may be used to modify the system configuration. A value of true indicates system configuration via the LCD panel is enabled. A value of false indicates system configuration via the LCD panel is disabled.

The CreationClassName of the scoping system.

The System Name of the scoping system.

Indicates the target state to which the instance is transitioning.

Possible values are:

• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the implementation does not support representing ongoing transitions.

A value other than 5 or 12 identifies the state to which the element is in the process of transitioning.