
Dell Unity™ Family Unisphere® Command Line Interface User Guide
View interfaces
View a list of interfaces on the system. You can filter on the interface ID.
Format
/net/if [ {-id <value> | -port <value> | -type <value>} ] showObject qualifier
| Qualifier | Description |
|---|---|
| -id | Type the ID of an interface. |
| -port | Type the port the interface is associated with. |
| -type | Specify the type of the interface. Valid values are:
|
Example
The following command displays the details of all interfaces on the system.
uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/if show -detailStorage system address: 10.0.0.1
Storage system port: 443
HTTPS connection
1: ID = if_0
Type = file
NAS server = nas_0
Port = eth0_spa
VLAN ID =
VLAN MTU size =
IP address = 3ffe:80c0:22c:4e:a:0:2:7f/64
Subnet mask =
Gateway = fe80::20a8bff:fe5a:967c
IPv4 mode =
IPv4 address =
IPv4 subnet mask =
IPv4 gateway =
IPv6 mode = static
IPv6 address = 3ffe:80c0:22c:4e:a:0:2:7f/64
IPv6 link-local address =
IPv6 gateway = fe80::20a8bff:fe5a:967c
MAC address = EA:3E:22:3F:0C:62
SP = spa
Preferred = yes
2: ID = if_1
Type = file
NAS server = nas_1
Port = eth1_spb
VLAN ID = 1
VLAN MTU size = 1500
IP address = 192.168.1.2
Subnet mask = 255.255.255.0
Gateway = 192.168.1.254
IPv4 mode = static
IPv4 address = 192.168.1.2
IPv4 subnet mask = 255.255.255.0
IPv4 gateway = 192.168.1.254
IPv6 mode =
IPv6 address =
IPv6 link-local address =
IPv6 gateway =
MAC address = EA:3E:22:21:7A:78
SP = spa
Preferred = yes
3: ID = if_2
Type = replication
NAS server =
Port = eth1_spb
VLAN ID =
VLAN MTU size =
IP address = 10.103.75.56
Subnet mask = 255.255.248.0
Gateway = 10.103.72.1
IPv4 mode = static
IPv4 address = 10.103.75.56
IPv4 subnet mask = 255.255.248.0
IPv4 gateway = 10.103.72.1
IPv6 mode =
IPv6 address =
IPv6 gateway =
MAC address = EA:3E:22:6D:BA:40
SP = spb
Preferred = no
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\