Dell Lifecycle Controller GUI v2.30.30.30 User's Guide

Before importing the server profile after replacing the system board, make sure that the following prerequisites are met:

• A backup image of the server with the old system board is present.
• If you are restoring from a vFlash SD card, it must be installed, and contain the backup image in a folder labeled SRVCNF. This image must be from the same server that you are trying to restore.
• If you are restoring from a network share, make sure that the network share where the backup image file is stored is accessible.

After replacing the system board, import the server profile from a vFlash SD card, network share, or a USB device.

• See Post-Import Scenario.
• The Service Tag is restored on the new system board from the backup file.