Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge FC430 Owner's Manual

PDF

Removing the IDSDM card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.

  3. If connected, disconnect all USB devices.

  4. If installed, remove the SD card(s).

  5. Remove the SSD cage.

  6. Keep the Phillips #2 screwdriver ready.

Steps

  1. Remove the screws securing the IDSDM card to the SSD cage.
  2. Lift the IDSDM card till it disengages from the standoff and slide the IDSDM card away out of the SSD cage.
    CAUTION: To prevent damage to the IDSDM card, you must hold the card only by its edges.
    Figure 1. Removing the IDSDM card
    This figure shows removing the IDSDM card.
    1. screw (2)
    2. screw hole (2)
    3. standoff (1)
    4. SSD cage
    5. IDSDM card

Next steps

  1. Install the SSD cage.
  2. Install the IDSDM card.
  3. If applicable, install the SD cards.
  4. Reconnect any disconnected USB devices.
  5. Follow the procedure listed in the After working inside your system section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\