Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

Displays configuration and status information for all modules or a specified module (server, storage sled, switch, CMC, fan unit, blower, power supply unit, chassis, main-board, IO cable, and FPC cable) in the chassis.

To use this subcommand, you must have CMC Login User privilege.

racadm getmodinfo [-m <
                                                module>] [-A]ra
                                             

• -m < module > — Specifies the module for which the configuration and status information is required. The default command (no options) displays information about all the major components in the chassis.
  < module > can be one of the following values:

  • server- n , where n = 1 to 4
  • server- nx , where n = 1 to 4; x = a to d
  • switch- n , where n = 1 or 2
  • pcie- n , where n = 1 to 8
  • CMC- n , where n = 1
  • fan- n , where n = 1 to 8
  • ps- n , where n = 1 to 2
  • chassis
  • main-board
  • io-cable
  • fpc cable

• -A — Does not display the headers and labels in the output.