To maintain proper airflow, install physicals disks from left to
right and front to back in each drawer. The following table lists
the slot numbers of the physical disks and the order in which the
disks need to be installed.
Physical Disk Installation Order
Slot Number
1
0
2
3
3
6
4
9
5
1
6
4
7
7
8
10
9
2
10
5
11
8
12
11
Figure 1. Slot Numbering
on the Disk Drawer
NOTE: If you need to install
less than 12 physical disks, you must follow the recommended physical
disk installation order. For example if you have to install only 7
disks, the order of installation should be 0, 3, 6, 9, 1, 4, and
7.
A minimum of four disks must be installed in the front
slots 0, 3, 6, and 9 of each drawer.
The MD3060e storage enclosure supports mixing of physical
disk types.
NOTE: 3.5"
10k and 15k RPM SAS drives are not supported. For the latest drive
support, refer to
Dell Enclosure Storage Support Matrix at:
Dell.com/powervaultmanuals.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\