Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Inspiron 14 7000 Service Manual

PDF

Procedure

CAUTION To avoid damaging the system board, ensure that no cables are placed under it.
  1. Align the screw holes on the system board with the screw holes on the palm rest and keyboard assembly.
  2. Replace the three screws (M2x3) that secure the system board to the palm rest and keyboard assembly.
  3. Connect the hard-drive cable and close the latch to secure the cable.
  4. Slide the touch-pad cable into the connectors on the system board and close the latch to secure the cable.
  5. Slide the keyboard cable and the status-light board cable into the connectors on the system board and close the latches to secure the cables.
  6. Adhere the tape that secures the keyboard cable to the system board.
  7. Connect the speaker cable to the system board.
  8. Slide the display cable into the connector on the system board and close the latch to secure the cable.
  9. Connect the power-adapter port cable to the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\