Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

getmacaddress

Table 1. Details of getmacaddress. The following table provides the details of getmacaddress attribute:
Description	Displays the MAC/WWN addresses for all modules or for a specified module. The decoder values in the Type column indicate the protocols of the network cards. 0— Unsupported 1— ISCSI 2— FCoE-FIP 3— iSCSI/FCoE-FIP To use this subcommand, you must have the CMC Login User privilege.
Synopsis	`racadm getmacaddress` `racadm getmacaddress -m chassis` `racadm getmacaddress -m switch-<n>` `racadm getmacaddress [-m < module>] [-t iscsi] [-x]` `racadm getmacaddress [-a]` `racadm getmacaddress -c IO-Identity` `racadm getmacaddress -c Flexaddress` `racadm getmacaddress -c Factory` `racadm getmacaddress -c all`
Input	-m < module > — Specifies the module whose MAC address you want to view. < module > may be one of the following: `server- n`, where n=1–4 `switch- n`, where n=1–2 -t — Displays the iSCSI MAC addresses for all servers or the specified server if used with -m option. -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and must be used with -m option. -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine cards. When FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN address is displayed. -c— Displays the Ethernet, iSCSI, MAC/WWN, assignment type, and partition status of all LOMs or mezzanine cards. Valid values for `-c` option are: IO-Identity — Displays the user-defined MAC/WWN addresses. FlexAddress — Displays the chassis assigned WWN/MAC addresses. Factory — Displays the MAC/WWN addresses for all LOMs or mezzanine cards. all — Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

Example

Displays the NDC or LOM MAC address.
```
racadm getmacaddress
```
Display iSCSI MAC addresses for all servers.
```
racadm getmacaddress -t iscsi
```

Display iSCSI MAC for server-1.

racadm getmacaddress -m server-1 -t iscsi

Display extra iSCSI MACs for server-1 (if available).
```
racadm getmacaddress -m server-1 -t iscsi -x
```
Displays the user-defined MAC and WWN address.
- racadm getmacaddress -c io-identity
- racadm getmacaddress -c io-identity -m server -2
Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
```
racadm getmacaddress -c all
```
Displays the chassis assigned WWN/MAC address.
```
racadm getmacaddress -c flexaddress
```
Displays the MAC/WWN addresses for all LOMs or mezzanine cards.
```
racadm getmacaddress -c factory
```

Table 2. MAC address for Chassis.
Displays the MAC address for chassis.

racadm getmacaddress -m chassis
< Name>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
CMC	Present	N/A	74:86:7A:D5:33:44	N/A

Table 3. MAC address for switch 1.
Displays the MAC address for switch –1

racadm getmacaddress -m switch-1
< Name>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
Switch-1	Present	Not Installed	00:00:00:00:00:00	Not Installed

Table 4. MAC address for switch 1.
Displays the MAC address for switch –1

racadm getmacaddress -m server-1
< Name>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
Server-1a	Present	F8:DB:88:3E:01:80	F8:DB:88:3E:01:81	F8:DB:88:3E:01:84
Server-1b	Present	F8:DB:88:3E:02:50	F8:DB:88:3E:02:6F	F8:DB:88:3E:02:72
Server-1c	Present	F8:DB:88:3E:08:09	F8:DB:88:3E:01:E9	F8:DB:88:3E:01:EC
Server-1b	Not Present	Not Installed	Not Installed	Not Installed

Table 5. MAC for server-1.

Display extra MACs for server-1 (if available).

racadm getmacaddress -m server-1 -x

<
                                                Name>

<
                                                Presence>

<
                                                BMC MAC Address>

<
                                                NIC1 MAC Address>

<
                                                NIC2 MAC Address>

server-1

Present

00:11:43:FD:B7:2A

00:11:43:FD:B7:2A

00:11:43:FD:B7:2B

00:11:43:FD:B7:2C

00:11:43:FD:B7:2D

Table 6. RACADM MAC address.
Displays the MAC address.

racadm getmacaddress
< Name>	< Type>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
CMC	N/A	Present	N/A	74:86:7A:D5:33:44	N/A
Server-1-A	Gigabit Ethernet	Present	74:86:7A:D6:CF:22	Not Installed	Not Installed
Server-2	Not Installed	Not Present	Not Installed	Not Installed	Not Installed
Server-3-A	10 GbE KR iSCSI FCoE-FIP FCoE-WWN 10 GbE KR	Present Present Present Present Present	74:86:7A:D6:D0:38	E0:DB:55:25:65:9C E0:DB:55:25:65:9D E0:DB:55:25:65:9D 20:01:E0:DB:55:25:65:9D E0:DB:55:25:65:A0	E0:DB:55:25:65:9E E0:DB:55:25:65:9E E0:DB:55:25:65:9F 20:01:E0:DB:55:25:65:9F E0:DB:55:25:65:A2
Server-4	Not Installed	Not Present	Not Installed	Not Installed	Not Installed
Switch-1	Gigabit Ethernet	Present	Not Installed	00:00:00:00:00:00	Not Installed

Table 7. Ethernet and iSCSI MAC address.
Displays Ethernet and iSCSI MAC address of all LOMs or mezzanine cards.

racadm getmacaddress
< Name>	< Presence>	< BMC MAC Address>	< NIC1 MAC Address>	< NIC2 MAC Address>
CMC	Present	N/A	00:1E:4F:1F:3C:58	N/A
Server-1	Present	00:1E:4F:2A:AF:7B	00:1E:4F:2A:D3:97	00:1E:4F:2A:D3:99
Server-2	Present	00:22:19:D2:1E:84	N/A	N/A
Server-3	Not Present	N/A	N/A	N/A
Server-4	Present	00:18:8B:FF:45:2A	00:18:8B:FF:AA:02	00:18:8B:FF:AA:04
Switch-1	Present	N/A	00:00:00:00:00:00	N/A

Table 8. User-defined MAC and WWN address.
Displays the user-defined MAC and WWN address.

racadm getmacaddress -c IO-Identity
< Name>	< Type>	< Presence>	< Active WWN/MAC>>	< Partition Status>>	< Assignment Type>>
server-1-A	IDRAC-Controller	Present	18:A9:9B:FD:C4:DF	N/A	Factory
	Gigabit Ethernet	Present	00:0A:00:0A:00:00	Unknown	IO-Identity
	Gigabit Ethernet	Present	00:0A:00:0A:00:01	Unknown	IO-Identity
	Gigabit Ethernet	Present	00:0A:00:0A:00:02	Unknown	IO-Identity
	Gigabit Ethernet	Present	00:0A:00:0A:00:03	Unknown	IO-Identity

Table 9. MAC/WWN addresses for all LOMs or mezzanine cards .
Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

racadm getmacaddress -c factory
< Name>	< Type>	< Presence>	< Active WWN/MAC>>	< Partition Status>>	< Assignment Type>>
Server-3-A	IDRAC-Controller	Present	5C:F9:DD:D6:1C:CE	N/A	Factory
	Gigabit Ethernet	Present	84:8F:69:FC:E8:F0	Unknown	IO-Identity
	Gigabit Ethernet	Present	84:8F:69:FC:E8:F1	Unknown	IO-Identity
Switch-1	10 GbE KR	Present	F8:B1:56:45:DD:BD	N/A	Factory

Table 10. Chassis assigned WWN/MAC address.
Displays the chassis assigned WWN/MAC address.

racadm getmacaddress -c flexaddress
< Name>	< Type>	< Presence>	< Active WWN/MAC>>	< Partition Status>>	< Assignment Type>>
Server-4-A	IDRAC-Controller	Present	F8:DB:88:3D:9F:A7	N/A	FlexAddress
	10 GbE KR	Present	F8:DB:88:3D:9F:A9	Disabled	FlexAddress
	10 GbE KR/3	Present	F8:DB:88:3D:A2:78	Unknown	FlexAddress
	10 GbE KR/3	Present	F8:DB:88:3D:A2:7B	N/A	FlexAddress

NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.

Table 11. console assigned MAC/WWN of all LOMs or mezzanine cards .
Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

racadm getmacaddress -c all
< Name>	< Type>	< Presence>	< Active WWN/MAC>>	< Partition Status>>	< Assignment Type>>
CMC	N/A	Present	34:17:EB:E6:E0:24	N/A	Factory
Server-1-A	10 GbE KR	Not Installed	10:98:36:AC:70:EB	Not Installed	Not Installed
Server-2	Not Installed	Not Present	Not Installed	Not Installed	Not Installed
Server-3-A	Reserved	Present
Switch-4	Not Installed	Not Present	Not Installed	Not Installed	Not Installed
Switch-1	Not Installed	Not Present	Not Installed	N/A	N/A

NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all commands are run, the output is displayed as Not Installed in the following columns:
- <Presence>
- <NIC1 MAC Address>
- <NIC2 MAC Address>

Welcome

Welcome to Dell

Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

getmacaddress

Rate this content