Skip to main content

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Identify pool capacity and configure a resource

Identify the SP where the server to be used is located by default

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/server –id nas_1 show 
Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:     ID           = nas_1
       Name         = MySFS1
       CIFS enabled = yes
       NFS enabled  = no
       SP           = spa
       Interface    = if_1

Check the maximum capacity of the appropriate pool on the identified SP

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/config/pool show -detail 
Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection


1: ID                                                = pool_1
   Name                                              = TestPool
   Description                                       =
   Total space                                       = 6266625720320 (5.6T)
   Current allocation                                = 2684354560 (2.5G)
   Remaining space                                   = 6263941365760 (5.6T)
   Subscription                                      = 111967084544 (104.2G)
   Subscription percent                              = 1%
   Alert threshold                                   = 70%
   Drives                                            = 4 x 3.1T SAS Flash 3
   Number of drives                                  = 4
   RAID level                                        = 10
   Stripe length                                     = 2
   Rebalancing                                       = no
   Rebalancing progress                              =
   Health state                                      = OK (5)
   Health details                                    = "The component is operating normally. No action is required."
   FAST Cache enabled                                = no
   Protection size used                              = 32768 (32.0K)
   Auto-delete state                                 = Idle
   Auto-delete paused = no
   Auto-delete pool full threshold enabled           = yes
   Auto-delete pool full high water mark             = 95%
   Auto-delete pool full low water mark              = 85%
   Auto-delete snapshot space used threshold enabled = no
   Auto-delete snapshot space used high water mark   = 25%
   Auto-delete snapshot space used low water mark    = 20%

2: ID                                                = pool_2
   Name                                              = Test1
   Description                                       =
   Total space                                       = 43403328880640 (39.4T)
   Current allocation                                = 57982058496 (54.0G)
   Remaining space                                   = 43345346822144 (39.4T)
   Subscription                                      = 1627792605184 (1.4T)
   Subscription percent                              = 3%
   Alert threshold                                   = 70%
   Drives                                            = 15 x 600.0G SAS; 
                                                       2 x 200.0G SAS Flash 2; 
                                                       8 x 6.0T NL-SAS; 
                                                       2 x 800.0G SAS Flash 2
   Number of drives                                  = 27
   RAID level                                        = Mixed
   Stripe length                                     = Mixed
   Rebalancing                                       = no
   Rebalancing progress                              =
   Health state                                      = OK (5)
   Health details                                    = "The component is operating normally. No action is required."
   FAST Cache enabled                                = yes
   Protection size used                              = 2147483648 (2.0G)
   Auto-delete state                                 = Idle
   Auto-delete paused                                = no
   Auto-delete pool full threshold enabled           = no
   Auto-delete pool full high water mark             = 95%
   Auto-delete pool full low water mark              = 85%
   Auto-delete snapshot space used threshold enabled = no
   Auto-delete snapshot space used high water mark   = 25%
   Auto-delete snapshot space used low water mark    = 20%

Configure a resource

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /stor/prov/fs create –name FileSystem01 -descr “NFS shares” –pool capacity –server nas_1 –size 1TB –type nfs 
Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

ID = res_1
Operation completed successfully.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\