Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell OptiPlex 3020–Small Form Factor Owner's Manual

PDF

Clearing CMOS

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove the cover.
  3. Remove the PCI card if installed.
  4. Identify the CMOS jumper on the system board, see the System Board Components.
  5. Place the 2-pin jumper plug on pins 1 and 2 to clear CMOS
  6. Install PCI card if installed.
  7. Install the cover.
  8. Connect the computer to the electrical outlet and power-on the computer to clear the CMOS.
  9. Power-off the computer and disconnect the power cable from the electrical outlet.
  10. Remove the cover.
  11. Replace the jumper on the pins 1 and 2.
  12. Install PCI card if installed.
  13. Install the cover.
  14. Follow the procedures in After Working Inside Your Computer.
  15. Power-on the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\