Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge R730xd Owner's Manual

PDF

Installing the optional hard drive backplane (rear)

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

  1. Align the notches on the backplane with the notches on the chassis.
  2. Lift the release pin and slide the backplane toward the back of the chassis until firmly seated.
  3. Release the release pin to lock the backplane to the chassis.
  4. Reconnect all the cables to the backplane.
    Figure 1. Installing the optional 2.5 inch (x2) hard drive backplane
    This figure shows installing the optional 2.5 inch (x2) hard drive backplane
    1. SAS cable
    2. release pin
    3. hard drive connector (2)
    4. power cable
    5. backplane signal cable

Next steps

  1. Install both the hard drives in their original location.
  2. Follow the procedure listed in the After working inside your system section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\