OpenManage Integration for VMware vCenter Version 4.0 Web Client Installation Guide

Creating connection profile

1. In the Connection Profile Description dialog box, click Next.
2. In the Connection Profile Name and Credentials dialog box, enter the connection Profile Name and connection profile Description, which is optional.
3. In the Connection Profile Name and Credentials dialog box, under iDRAC Credentials, do either of the following actions, depending on configuring iDRAC with or without Active Directory:
   NOTE The iDRAC account requires administrative privileges for updating firmware, applying hardware profiles, and deploying hypervisor.
   • The iDRACs that are already configured and enabled for Active Directory on which you want to use Active Directory, select Use Active Directory; otherwise scroll down to configure the iDRAC credentials.
     1. In Active Directory User Name, type the user name. Type the user name in one of these formats: domain\username or username@domain. The user name is limited to 256.
     2. In Active Directory Password, type the password. The password is limited to 127 characters.
     3. In Verify Password, type the password again.
     4. Depending on your requirement, perform one of the following actions:
        • To download and store the iDRAC certificate and validate it during all future connections, select Enable Certificate Check.
        • To not store and perform the iDRAC certificate check during all future connections, clear Enable Certificate Check.
   • To configure the iDRAC credentials without Active Directory, perform the following tasks:
     1. In User Name, type the user name. The user name is limited to 16 characters. See the iDRAC documentation for information about user name restrictions for the version of iDRAC that you are using.
     2. In Password, type the password. The password is limited to 20 characters.
     3. In Verify Password, type the password again.
     4. Perform one of the following actions:
        • To download and store the iDRAC certificate, and validate it during all future connections, select Enable Certificate Check.
        • To not store and perform the iDRAC certificate check during all future connections, clear Enable Certificate Check.
4. In Host Root, perform one of the following steps:
   • The hosts that are already configured and enabled for Active Directory on which you want to use Active Directory, select Use Active Directory, and perform the following steps; otherwise configure your host credentials:
     1. In Active Directory User Name, type the user name. Type the user name in one of these formats: domain\username or username@domain. The user name is limited to 256 characters.
        NOTE For host user name and domain restrictions, see the following:

        Host user name requirements:

        • Between 1 and 64 characters long
        • No nonprintable characters
        • No Invalid characters, such as " / \ [ ] : ; | = , + * ? < > @

        Host domain requirements:

        • Between 1 and 64 characters long
        • First character must be alphabetical
        • Cannot contain a space
        • No Invalid characters, such as " / \ [ ] : ; | = , + * ? < > @
     2. In Active Directory Password, type the password. The password is limited to 127 characters.
     3. In Verify Password, type the password again.
     4. Perform one of the following actions:
        • To download and store the host certificate, and validate it during all future connections, select Enable Certificate Check.
        • To not store and perform the iDRAC certificate check during all future connections, clear Enable Certificate Check.
   • To configure host credentials without Active Directory, perform the following tasks:
     1. In User Name, the user name is root, which is the default user name and you cannot change the user name. However, if the Active directory is set, you can choose any Active directory user and not root.
     2. In Password, type the password. The password is limited to 127 characters.
        NOTE The OMSA credentials are the same credentials that are used for the ESXi hosts.
     3. In Verify Password, type the password again.
     4. Perform one of the following actions:
        • To download and store the host certificate, and validate it during all future connections, select Enable Certificate Check.
        • To not store and perform the host certificate check during all future connections, clear Enable Certificate Check.
5. Click Next.
6. In the Connection Profile Associated Hosts dialog box, select the hosts for the connection profile and click OK.
   NOTE If you select hosts that are running ESXi 6.5 or later, ensure that you click the icon for enabling the WBEM service on all those hosts.
7. To test the connection profile, select one or more hosts and click Test Connection.
   NOTE This step is optional and checks whether the host and iDRAC credentials are correct or not. Although this step is optional, Dell recommends you to test the connection profile.

   NOTE The test connection fails if the WBEM service is disabled on hosts with ESXi 6.5 or later.
8. To complete the creation of profile, click Next.
   After you click next, all details that you provide in this wizard is saved and you cannot modify the details from the wizard. You can modify or create more connection profiles for this vCenter detail from the Manage > ProfilesConnection Profiles page after completing the configuration from the configuration wizard. See Modifying connection profile in OpenManage Integration for VMware vCenter User’s Guide available at Dell.com/support/manuals.