Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge C4130 Owner's Manual

PDF

Installing the 1.8 inch uSATA SSD backplane

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in before working inside your system.
  3. Remove the 1.8 inch SSD cage.

NOTE: The 1.8 inch SSD backplane is installed on the back of the 1.8 inch SSD cage.

Steps

  1. Slide the SSD backplane tab into the slot on the SSD cage.
  2. Align the screw hole on the SSD backplane with the screw hole on the SSD cage.
  3. Secure the SSD backplane to the SSD cage by using the screw.
    Figure 1. Installing the 1.8 inch SSD backplane
    This figure shows installing the 1.8 inch SSD backplane.
    1. screw
    2. SSD backplane
    3. tab on the SSD backplane
    4. slot on the SSD cage
    5. SSD cage

Next steps

  1. Install the SSD cage.
  2. Follow the procedure listed in after working inside your system.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\