Dell SD7000-S — Storage Designed for Scality RING Owner's Manual
About your system
The Dell SD7000-S — Storage Designed for Scality RING is a 4U 90 hard drive, ultra-dense storage appliance purpose built for use with RING™ software from Scality. The system consists of the Dell SD7000-S, which is the chassis and up to two server sleds.
The Dell SD7000-S storage appliance benefits from all the features of the Intel Xeon EP E5-2600v3 product family as well as an extremely dense and energy efficient shared infrastructure chassis. The combination of Intel enhancements with the E5-2600v3 processors and the Dell SD7000-S ultra-dense chassis provides performance, efficiency, and flexibility in one dense package. It supports complete lifecycle management with the Dell™ OpenManage™ portfolio of systems management solutions, including leading remote management with iDRAC8 with Lifecycle Controller.
The storage server is shipped from Dell. The Scality RING™ software is installed and configured at the customer site by Scality or a Scality certified partner.
Key features:
System Configurations
| System | Configuration |
|---|---|
| Single-node systems with one server sled |
|
| Dual-node systems with two server sleds |
|
- A selection of high performance E5-2600v3 or v4 series processors up to 135 W Thermal Design Power (TDP).
- Systems management with support for iDRAC8 Edition.
- Redundant hot-plug power supply for added reliability.
- Serviceable nodes give the ability to service
one node while the other is running. Both nodes work independently
and control a maximum of 45 HDDs. In a single-node system, failure of a node, results in failure of the chassis.
- Each sled has two boot drives and four PCIe Gen 3 slots.
- Up to 384 GB of memory with 12 DDR4 slots (32 GB DIMMs) per server node.