Skip to main content
Contact Us

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Manage disk processor enclosure (DPE)

The following table lists the health state values for system disk processor enclosures (DPEs).

Table 1. Disk processor enclosure health state values
Code Health state Reason(s)
0 Unknown
  • The health of the component cannot be determined.
5 OK
  • The DPE is operating normally.
7 OK_BUT
  • The DPE is adjusting the communication speed.
10 Degraded/Warning
  • The DPE performance is degraded.
20 Major failure
  • The DPE has a disk drive-type mismatch.
  • The DPE has taken a communication fault.
  • The DPE has faulted.
  • The DPE has a faulted LCC.
  • The DPE has been misconfigured.
  • The DPE has been miscabled.
  • The DPE has been removed.
  • The DPE had taken a power fault.
  • The DPE is connected to a faulted I/O module.
  • The DPE has taken an inter-processor control fault and needs to be recovered.
  • The DPE has taken an inter-processor communication fault and needs to be recovered.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\