- Notes, cautions, and warnings
- Additional resources
- Business case
- Solution overview
- Key results / recommendations
- Introduction
- Serviceability commands
- Dump ACL database (svc_acldb_dump)
- Array configuration (svc_arrayconfig)
- Collect and Upload Support Materials (svc_autosendhome)
- Apply custom log-on banners (svc_banner)
- Boot control (svc_boot_control)
- Cache (svc_cache)
- Antivirus configuration (svc_cava)
- Configure backup and recovery (svc_cbr)
- Change hardware configuration (svc_change_hw_config)
- Check hardware configuration (svc_check_hw_config)
- CIFS support (svc_cifssupport)
- Configure ConnectEMC (svc_connectemc)
- Copy data in vault drives (svc_copyto)
- Upload SSL certificates (svc_custom_cert)
- Dynamic Access Control (svc_dac)
- Data protection operations (svc_dataprotection)
- Data collection (svc_dc)
- System diagnostics (svc_diag)
- ELMS usage information (svc_elms)
- ESRS Virtual Edition (svc_esrs_ve)
- Event Publishing diagnostics (svc_event_publishing)
- Firewall (svc_firewall)
- Help (svc_help)
- Modify data import sessions (svc_imt)
- Initial configuration (svc_initial_config)
- Inject troubleshooting software tool (svc_inject)
- Base Management Controller interface (svc_ipmi)
- Restore KMIP Server configuration (svc_kmip)
- View locks (svc_lockd)
- Mapped RAID (svc_mapped_raid)
- Mount storage (svc_mount)
- Advanced NAS settings (svc_nas)
- Create management interface (svc_network)
- Network configuration information (svc_networkcheck)
- Network Bond options for FSN and LACP connections (svc_network_bond)
- Dump NFS clients (svc_nfssupport)
- Synchronize time (svc_ntp)
- Operating system information (svc_oscheck)
- NAS server backup and restore statistics (svc_pax)
- Collect performance information (svc_perfcheck)
- Purge logs (svc_purge_logs)
- Restore Unity OE (svc_reimage)
- Reinitialize Unity to factory settings (svc_reinit)
- Service Mode information (svc_rescue_state)
- Management stack controls (svc_restart_service)
- Map a Linux block device to a VMware hard disk (svc_scsi_id)
- Service user password configuration (svc_service_password)
- Service shell (svc_service_shell)
- Shutdown (svc_shutdown)
- Enable Secure Shell (svc_ssh)
- STIG (svc_stig)
- Run FSCK on storage (svc_storage_integritycheck)
- Output storage information (svc_storagecheck)
- SupportAssist (svc_supportassist)
- Collect Tie-breaker Node trace information (svc_tbn_dc)
- Configure Tie-breaker Node network (svc_tbn_network)
- Change Tie-breaker Node password (svc_tbn_password)
- Shutdown Tie-breaker Node VM (svc_tbn_shutdown)
- Redirect output (svc_tcpdump)
- Display Real-time File Statistics (svc_topstats)
- UDoctor utility (svc_udoctor)
- Dump VHDX metadata (svc_vhdx)
- View services (svc_view_services)
- Virtual platform host check (svc_vp_hostcheck)
- Appendix A
- Appendix B
Dell Unity™ Family Service Commands Technical Notes
Additional resources
As part of an improvement effort, revisions of the software and hardware
are periodically released. Therefore, some functions that are described in this document might
not be supported by all versions of the software or hardware currently in use. The product
release notes provide the most up-to-date information about product features. Contact your
technical support professional if a product does not function properly or does not function as
described in this document.
Where to get help
Support, product, and licensing information can be obtained as described below.
Product information
For product and feature documentation or release notes, go to Unity Technical Documentation at the Unity Ino Hub.
Troubleshooting
For information about products, software updates, licensing, and service, go to Dell Support (registration required). After logging in, locate the appropriate product page.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\