Windows 10 IoT Enterprise for Wyse 5060 Thin Client Maintenance Release 1 Release Notes

Important notes

Use the build 5060_0A71_32GB_Upgrade.exe to upgrade from Windows Embedded Standard 7P to Windows 10 IoT Enterprise through Wyse Management Suite, Wyse Device Manager, or USB Imaging Tool.
Select Force this version rule to create a policy from Wyse Management Suite when you upgrade from Windows Embedded Standard 7P to Windows 10 IoT Enterprise.
Figure 1. Force this version rule
Wyse Device Agent and Boot Agent must be pushed to the device before imaging from Wyse Management Suite.
For USB imaging, the boot mode must be selected as both in BIOS settings.
RAMDiskSize.exe is created to modify the RAM size to 100 MB in write filter enabled state and 512 MB in write filter disabled state. This RAM size is set for devices with 4 GB RAM and Windows 10 IoT Enterprise.
If the RAM size is greater than 4 GB, the RAM size is set to 512 MB in both write filter enabled state and disabled state.
vWorkspace is not supported in this build.
Adobe flash player is not supported in this build. All components specific to adobe flash player are removed.
To support Wyse Management Suite imaging, upgrade and standard images are created separately, with the change in the common folder structure.

Data is not available for the Topic