/? or /h
Help option
|
Displays command line options and help information.
|
packagename.exe /?
packagename.exe
/h
|
/c
Check option
|
Determines if the update can be applied to the target system.
The
/s option is required with this option.
Options
/f,
/e,
and
/r are not valid with this option.
When you click
in the graphical user interface (GUI) mode, the same
checking process is performed.
|
packagename.exe /s /c /l=c:\pkg.log
|
/e=<path>
Extract option
|
Extracts all files contained in the DUP to the path you
specify. If the directory specified in the path does not exist, it
is created.
If the path contains spaces, use quotation marks
around the <
path> value.
The
/s option is required with this option.
Options
/f,
/c, and
/r are not
valid with this option.
|
packagename.exe /s /e=c:\update
packagename.exe /s /e="c:\update files"
|
/f
Force option
|
Allows downgrade of the software to a previous (older) version.
The
/s option is required with this option.
Options
/e and
/c are not valid with this option.
-
NOTE: Before downgrading
the software to a previous version, see the documentation for the
previous version.
|
packagename.exe /s /f /l=c:\pkg.log
|
/l=<filename>
Log option
|
Appends logged messages to a specified ASCII file; creates
a new file if one does not exist.
-
NOTE: If the file name contains
spaces, use quotation marks around the <
filename> value.
The /s option is required with this option.
|
packagename.exe /s /l=c:\pkg.log
packagename.exe /s /l="c:\Update Log\pkg.log"
|
/r
Reboot option
|
Reboots the system, if required, after performing the update.
The reboot does not occur:
- If the DUP fails or is not applicable to the target system.
- If the DUP does not require a reboot.
The
/s option is required with this
option.
Options
/e and
/c are not valid with this option.
|
packagename.exe /s /r /l=c:\pkg.log
|
/s
Silent option
|
Executes the update silently without user intervention.
When
/s is not specified, the DUP is launched
in GUI (interactive) mode.
The
/s option is required when using the
/e,
/f,
/c,
/l, and
/u options.
-
NOTE: Using the
/s option causes all output to be written to log files.
|
packagename.exe /s /l=c:\pkg.log
|
/u=<filename>
Unicode Log option
|
Appends logged messages to a specified Unicode file; creates
a new file if one does not exist. If the file name contains spaces,
use quotation marks around the <
filename> value.
The
/s option is required with this option.
|
packagename.exe /s /u=c:\pkg.log
packagename.exe /s /u="c:\Update Log\pkg.log"
|