Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s User's Guide

Selected component information

Information for the selected component is displayed in three independent sections:
  • Health and Performance, and Properties — Displays the active, critical, and non-critical events as displayed by the hardware logs and the performance data that vary with time.
  • Properties — Displays the component properties that do not vary with time, or that change only infrequently.
  • Quick Links — Provides links to navigate to the most frequently accessed pages, and also the most frequently performed actions. Only links applicable to the selected component are displayed in this section.

The following table lists the component properties and information displayed on the Chassis Health page in web interface.

  • NOTE: In Multi-Chassis Management (MCM), all the Quick Links associated with the servers are not displayed.
Table 1. Component properties. The following table describes the component properties.
Component Health and Performance Properties Properties Quick Links
CMC
  • MAC Address

  • IPv4

  • IPv6

  • Firmware

  • Last Update

  • Hardware

  • CMC Status

  • Networking

  • Firmware Update

All Servers and Individual Servers
  • Power State

  • Power Consumption

  • Health

  • Power Allocated

  • Temperature

  • Name

  • Model

  • Service Tag

  • Host Name

  • iDRAC

  • CPLD

  • BIOS

  • OS

  • CPU Information

  • Total System Memory

  • Server Status

  • Launch Remote Console

  • Launch iDRAC GUI

  • Power Off Server

  • Graceful Shutdown

  • Remote File Share

  • Deploy iDRAC Network

  • Server Component Update

  • NOTE: Quick links for Power Off Server and Graceful Shutdown are displayed only if the Server Power state is On. If the Server Power State is Off, then the quick link for Power On Server is displayed instead.
All Storage and Individual Storage Sleds

Health

  • Name

  • Model

  • Service Tag

  • Asset Tag

  • Number of Controllers
    • Physical Disk Slots

    • Connected to Server

    • Controller Mode Capability

  • Intrusion State

  • Storage Array Status

  • Storage Array Setup

Power Supply Units

Power Status

Capacity

  • Power Supply Status

  • Power Consumption

  • System Budget

PCIe Devices
  • Installed

  • Assigned

  • Model

  • Mapping

  • Vendor ID

  • Device ID

  • Slot Type

  • Module Type

  • Fabric

  • Power Status

  • PCIe Status

  • PCIe Setup

Fans
  • Speed

  • PWM (% of Max)

  • Fan Offset

  • Warning Threshold

  • Critical Threshold

  • Fans Status

  • Fan Configuration

IOM Slot
  • Power State

  • Role

  • Model

  • Service Tag

IOM Status


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\