Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Active System Manager Release 8.1.1 Installation Guide

PDF

Configuring Virtual Appliance with Two NICS

When PXE network is not routable and accessible from ASM Virtual Appliance, then you need to add a separate NIC the ASM Virtual Appliance.

Follow the steps below to add the new network adapter with ASM virtual appliance.

  1. In VMware vSphere, select the Virtual Appliance and select “Power Off”.
  2. Select Virtual Appliance and select “Edit Settings”.
  3. Select “Add” in the properties page and choose “Ethernet Adapter”. Select Adapter Type as “VMXNET3”.
  4. Select the PXE port-group name that needs to be associated with the new network.
  5. Select “Next” and then “OK” to ensure that the settings are updated on the Virtual Appliance
  6. Assign static IP address on the new network using the steps provided in section “Configuring Static IP Address in the Virtual Appliance”.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\