CMC network default setting is Static with IP address of "192.168.0.120". Complete the CMC network setup by directly connecting
a client system on the same network. For more information, see the
Chassis Management Controller for PowerEdge FX2 Version 2.10 User's Guide available at
dell.com/cmcmanuals.
Connecting the STK/Gb2 port of the CMC, located at the back of the chassis, to the management network can cause network disruption
if not properly cabled and configured in CMC. Before using the STK/Gb2 port of the CMC, see the
PowerEdge FX2 Owner's Manual available at
dell.com/support/manuals.
The PCIe cards are allocated to sleds based on the sled type, for more information, see the
Chassis Management Controller for PowerEdge FX2 Version 2.00 User's Guide available at
dell.com/cmcmanuals. This is applicable to Dell PowerEdge FX2s chassis.
Some advanced features require CMC enterprise license. For more information about the CMC licenses, see the
Chassis Management Controller for PowerEdge FX2 Version 2.10 User's Guide available at
dell.com/cmcmanuals.
Storage features using Storage Sleds require a storage license. For more information about storage licenses, see the
Chassis Management Controller for PowerEdge FX2 Version 2.10 User's Guide available at
dell.com/cmcmanuals.
When Certificate Validation is “Enabled”, FQDN of the system should be provided. If the IP address of the Domain Controller
is specified when the certificate validation is enabled, the Active Directory login may not work.
The
cfgRacTuneIdracDNSLaunchEnable object and the "iDRAC Launch Method" setting on the
Chassis Overview > Setup > General CMC Graphical Interface requires the Chassis Configuration Administrator privilege.
Microsoft Windows Server 2012, Windows Server 2008 R2, Windows 7 do not support TLS 1.2 and TLS 1.1. Install update below
to enable TLS 1.2 and TLS 1.1 as a default secure protocols in WinHTTP in Windows. For details, see the Microsoft knowledge
base article 3140245 at
support.microsoft.com.
Supports LDAP authentication with OPEN-DS. OPEN-DS must have DH key larger than 1024 bits.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\