- Notes, cautions, and warnings
- Preface
- Getting Started
- SolutionPack for Amazon AWS
- SolutionPack for Block Chargeback
- SolutionPack for Brocade FC Switch
- Overview
- Brocade switch and SMI agent configuration
- Configuring Brocade SMI Agents
- Configuring Brocade switches for alert consolidation
- Configuring Brocade switches for SNMP discovery
- Configuring Brocade switches for REST discovery
- Installing the SolutionPack
- Passive host discovery configuration options
- Limitations
- SolutionPack for Cisco MDS/Nexus
- Overview
- Performing pre-configuration tasks
- Configuring switches for SNMPv1 and SNMPv2c
- Configuring switches for SNMPv3
- Configuring Cisco switches for alert consolidation
- Installing the SolutionPack
- Adding and configuring devices
- Capabilities
- Passive host discovery configuration options
- Enabling passive host discovery through Generic-SNMP
- Limitations
- SolutionPack for Cisco UCS
- SolutionPack for Configuration Compliance
- SolutionPack for Dell EMC SC Series
- SolutionPack for Dell EMC Centera
- SolutionPack for Dell EMC Data Domain
- SolutionPack for Dell EMC Data Protection Advisor
- SolutionPack for Dell EMC ECS
- SolutionPack for Dell EMC PowerScale
- SolutionPack for Dell EMC PowerStore
- SolutionPack for Dell EMC RecoverPoint
- SolutionPack for Dell EMC PowerFlex
- SolutionPack for Dell EMC Unity/VNX/VNXe
- SolutionPack for Dell EMC ViPR Controller
- SolutionPack for Dell EMC VMAX
- Overview
- Configuring the access credentials
- Preparing Dell EMC VMAX for discovery and data collection
- Installing the SolutionPack
- Adding and configuring devices in Discovery Center
- Troubleshooting Discovery Center connectivity failures
- Updating SolutionPack alert definitions
- Configuring Solutions Enabler client access for VMAX
- Resolving SMI-S Provider port conflicts
- Limitations
- SolutionPack for Dell EMC VMAX/PowerMax
- SolutionPack for Dell EMC VPLEX
- SolutionPack for Dell EMC VxRail
- SolutionPack for Dell EMC XtremIO
- SolutionPack for Hitachi Device Manager
- Overview
- Preparing Hitachi Device Manager for discovery and data collection
- Preparing Hitachi Ops Center Configuration Manager and Hitachi Ops Center Analyzer for discovery and data collection through REST
- Installing the SolutionPack
- Discovery of Hitachi Device Manager through Discovery center
- Troubleshooting Device Manager collection
- Embedded Performance Collection
- Limitations
- SolutionPack for HP 3PAR StoreServ
- SolutionPack for HPE Nimble
- SolutionPack for HP Storageworks XP
- SolutionPack for Huawei OceanStor
- SolutionPack for IBM DS
- SolutionPack for IBM FlashSystem
- SolutionPack for IBM LPAR
- SolutionPack for IBM SAN Volume Controller/Storwize
- SolutionPack for IBM XIV
- SolutionPack for Microsoft Azure
- SolutionPack for Microsoft Hyper-V
- SolutionPack for Microsoft SQL Server
- SolutionPack for NetApp FAS
- SolutionPack for Oracle Database
- SolutionPack for Oracle MySQL Database
- SolutionPack for Physical Hosts
- Overview
- Preparing the hosts for discovery and data collection
- Guidelines for SNIA libraries and HBA drivers
- Windows host configuration for discovery and data collection
- Types of discovery allowed by different privilege levels
- Customizing a WinRM URL prefix
- Prerequisites for discovering a Windows host using non-admin user credentials
- Using the host configuration utility
- Configuring group policy
- Configuring firewall port exception using group policy
- Updating group policy
- Generating a certificate
- Unix host/LPAR (VIO Server/Client) configuration for discovery and data collection
- Configuring sudo for host/LPAR (VIO Server/Client) discovery
- Configuring PowerBroker for host/LPAR(VIO Server/Client) discovery
- Configuring centrify dzdo for host/LPAR(VIO Server/Client) discovery
- Generating a public and private key pair
- Importing a private key into the Collector
- Configuring SSH authentication
- Configuring ESX hosts to collect PowerPath metrics
- Configuring hosts to collect PowerPath metrics
- Installing the SolutionPack
- SolutionPack reconfiguration
- Configuring Dell EMC SRM to search for additional paths for INQ
- Recommendations
- iSCSI Support
- Limitations
- SolutionPack for Pure Storage
- SolutionPack for System Health
- SolutionPack for VMware vSphere & vSAN
- Discovery Center
- Device Config Wizard
- Troubleshooting
- Confirming report creation
- What to do if data does not appear in any reports
- What to do if data does not appear in some reports
- External storage capacity is double counted in capacity reports
- Authorization fails for passwords having special characters
- Troubleshooting discovery issues, slow reports, and missing data
- Viewing collector errors in the Collector-Manager log files
- Troubleshooting agentless host discovery for Windows
- Troubleshooting UNIX Agentless Host Discovery
- Environment check for non-root configurations
- Using logs on a UNIX host
- SNIA Library check
- Gathering information about AIX HBAs
- Gathering information about HP-UX HBAs
- Gathering information about Solaris HBAs
- Gathering information about Linux HBAs
- Installing or modifying Emulex HBA drivers on Linux
- Installing or modifying Emulex HBA drivers on UNIX
- Installing or modifying QLogic HBA drivers on UNIX/LINUX
- Troubleshooting passive host discovery
- Documentation Feedback
Dell EMC SRM 4.7 SolutionPack Guide
Preface
NOTE: For the latest Dell EMC SRM documentation, go to the
Dell EMC SRM Documentation Index.
Related documentation
The following Dell EMC publications provide additional Dell EMC SRM information and are available on Dell EMC Online Support:
- Dell EMC SRM SolutionPack Release Notes: This publication contains known issues and supplemental information for each SolutionPack.
- Dell EMC M&R Release Notes: This publication contains known issues and supplemental information related to the Dell EMC M&R platform, which provides the foundation for Dell EMC SRM.
- Dell EMC SRM Support Matrix: This publication lists SolutionPack compatibility, prerequisites, data collection interfaces, and ports.
Your comments
Your suggestions will help us continue to improve the accuracy, organization, and overall quality of the user publications. Send your opinions of this document to SRM Documentation.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\