Microsoft Windows 10 IoT Enterprise for Dell Wyse Thin Clients Administrator’s Guide

• Wyse 5020 thin client with Win10 IoT (D90Q10)

• Wyse 7020 thin client with Win10 IoT (Z90Q10)

• Wyse 7020 accelerated graphics thin client with Win10 IoT (Z90QQ10)

To boot the thin client from a UEFI USB key, do the following:

1. During system start up, press Delete when you see a Wyse logo.

   The BIOS Setup screen is displayed.

2. Set the Secure Boot to Disabled.

3. Set the Boot from USB to Enabled.

4. Save the changes and exit.

5. From the pop-up menu, select your USB key, and boot as Normal.

• Wyse 5060 thin client

• Wyse 7040 thin client

• Latitude 3480 mobile thin client

• Latitude 5280 mobile thin client

• Latitude 3190 mobile thin client

• Latitude 5490 mobile thin client

To boot the thin client from a UEFI USB key, do the following:

1. During system start-up, press F2 when you see a Dell logo.

   The BIOS Setup screen is displayed.

2. Set the Secure Boot to Disabled.

3. Click System Configuration > USB Configuration , and select the Enable USB Boot Support check box.

4. Save the changes and exit.

5. During system start up, press F12, and select USB key in the boot menu.