- Notes, cautions, and warnings
- Introduction
- Setting Up the Windows 10 Operating System
- Boot up and log in
- Factory reset
- System restore and backup recovery
- Security Baseline settings
- Update 4G module firmware
- Update 5G module firmware
- Disabling bands in Windows after firmware update or SIM card change
- Windows 10 IoT Enterprise LTSC basic functions
- Accessing and updating the BIOS
- SuperIO Function Library
- Digital Input/Output Function of the Intel PCH Controller
- Digital Input/Output Function from PCA9535 GPIO
- Intel Active Management Technology
- COM Port and Ethernet Names for Mini PCIe Cards
- Windows troubleshooting
- Setting Up the Ubuntu Operating System
- Boot up and log in
- Create bootable USB stick for restore
- Back up and restore Ubuntu 20.04 LTS
- Update BIOS capsule
- Update 4G module firmware
- Update 5G module firmware
- Disabling bands in Ubuntu after firmware update or SIM card change
- Ubuntu 20.04 LTS basic functions
- System shutdown and restart
- Ubuntu OTA update
- List installed packages
- Update the system name
- Change the time zone
- Root user credential
- Create new user
- Select language
- Display
- USB
- Configure Ethernet
- Configure WiFi network
- Configure Bluetooth
- Connect 4G or 5G WWAN
- Identify 4G or 5G module
- Change 5G SIM slot and connect to the Internet
- Set up 5G Stand-Alone mode for private networking
- Access GPS
- Remote login
- Set up audio and microphone
- SSD security-erase
- Connect to the serial port
- Mount USB storage
- Configure watchdog
- Configure GPIO
- TPM tasks
- Wake events
- Enable RAID feature
- Isolated Canbus uFM expansion module
- EMP2-X2S1 card with isolated RS-232 uFM expansion module
- EMP2-X4S2 card with isolated RS-422/485 uFM expansion module
- Connect a PCA9535 GPIO expander board
- Ubuntu troubleshooting

