Dell PowerEdge T320 Systems Owner's Manual

Installing A Non-Redundant AC Power Supply

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Unpack the new power supply.
Open the system.
Slide the new power supply into the power supply unit cage until the power supply is fully seated.
Tighten the screw to secure the power supply to the chassis.
Connect all the power cables to the system board, hard-drive backplane, hard drives, and optical drives, as applicable.
Close the system.
If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.