Dell Chassis Management Controller for Dell EMC PowerEdge FX2 Version 2.10 Release Notes

• Fixed an issue causing a control panel synchronization failure during CMC firmware update.
• Fixed an issue causing the PCIe adapters to potentially not link at the correct width or speed during sled reset.

Release 2.00

• Fixed an issue causing shutdown of servers in redundancy alert only (RAO) mode during power supply failure.
• Fixed an issue causing continuous rebooting of CMC (version <= 1.3x) with 2400W PSU.
• Fixed an issue causing failure of racresetcfg, when the six RSA-4096 or four RSA-2048, and two 2048 DSA SSH public keys are uploaded to the CMC.

Release 1.42

• Fixed an issue causing unavailability of a raid licence resulting in foreign configuration during a CMC reset.

Release 1.40

• Fixed an issue that caused the Server Profile page to hang when a profile is applied to multiple servers.

Release 1.33

• Fixed an issue that occasionally prevented CMC from applying the desired Fan PWM after a CMC reset.

Release 1.32

• Fixed the Server/Host OS Network Flap issue, which occurs occasionally on Modular platforms for a short duration during CMC initialization.
• Fixed the Server/Host OS Network port off issue, which occurs after CMC reset on Full-height Modular platforms when the second network daughter card is not installed.
• Fixed an issue causing the CMC Web GUI to become unresponsive while using Active Directory login with WinRM.
• Fixed an issue causing memory-full condition when the internal log files are overgrown.

Release 1.30

• Fixed an issue with the “getmacaddress –m <server> –t iscsi” command displaying non-iSCSI MAC addresses after using the iSCSI filter.